Healthrider HRTL61706.0 manual HOW to Lower the Treadmill for USE

Page 21

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down- ward until the catch is past the latch pin.

2.Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails.

Do not drop the frame to the floor. Make sure to bend your legs and keep your back straight.

Frame

Open

 

Latch

 

Knob

 

Latch Pin

 

Frame

21

Image 21
Contents QUESTIONS? Model No. HRTL61706.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedDo not tighten the Upright Bolts yet Do not tighten the Upright Bolts yet See steps 2 and 4. Fully tighten the two Endcap ScrewsTighten the Bolts yet Connectors are not Connected Page Small Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerFollow your progress with the display Measure your heart rate if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select one of the preset programsInsert the key fully into the console Press the Start button to start the program HOW to USE a Calorie ProgramFollow your progress with the display Optional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Top View Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R0806AOrdering Replacement Parts Exploded Drawing A-Model No. HRTL61706.0 R0806A Exploded Drawing B-Model No. HRTL61706.0 R0806A Exploded Drawing C-Model No. HRTL61706.0 R0806A Exploded Drawing D-Model No. HRTL61706.0 R0806A Limited Warranty