JVC LVT1040-008A manual Tone Control BASS/TREBLE, Auto Power Off A.P.off, No signal condition

Page 13

Basic Operations

Tone Control (BASS/TREBLE)

You can control the tone by changing the bass (low frequen- cy) and treble (high frequency).

On the Remote Control

1 Press the BASS/TREBLE button.

Each time you press the button, the Tone Control mode changes as follows.

BASS = TREBLE = Normal display = (back to the begin- ning)

2 While “BASS” or “TREBLE” appears on the display, press the VOLUME + or - button to adjust the bass or treble level.

You can change the level within the range of -5 to +5. (0: flat)

3 Press the BASS/TREBLE button until normal display appears.

Waiting for five seconds will also return the System to the normal display.

Auto Power Off (A.P.off)

You can automatically turn off the System when no signal condition continues for three minutes. This function is ef- fective when the source is set to “CD”, but not to “FM”, “AM” or “ LINE”.

To Enable the A.P.off function (When the source is “CD”)

1 Press the A.P.off button on the Remote Control until “A.P.off SET” appears on the display.

Then, the “A.P.off” indicator lights up on the display.

•Each time you press the button, the display alternates as follows.

A.P.off SET Ô A.P.off STOP

When no signal condition is detected, the “A.P.off” indica- tor will start blinking soon.

No signal condition:

Source CD: CD is stopped or no CD is inserted.

When no signal condition continues, “A.P.off 20 sec” (20 seconds left before elapsed time reaches three minutes) ap- pears on the display. The displayed time is counted down and, finally, the System is turned off (Standby mode).

•If a CD is played back, the “A.P.off” indicator stops blinking and stays lit again.

•If you press a button or turn the VOLUME control, three-minute counting down is reset and counting down newly restarts.

To disable the A.P.off function

When the source is “CD”, press the A.P.off button on the Remote Control until “A.P.off STOP” appears on the dis- play.

Then, the “A.P.off” indicator goes out.

Entering the Number with the Remote Control (Numeric Keys)

You will use the Numeric Keys on the Remote Control to enter numbers for presetting stations, recalling the preset stations, selecting track number, or programming the play- ing tracks on a CD.

How to enter the number with the Numeric Keys is ex- plained here.

Examples:

•To enter number 5, press 5.

•To enter number 10, press 10.

•To enter number 15, press +10 then 5.

•To enter number 20, press +10 then 10.

•To enter number 25, press +10, +10, then 5.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents FS-X3 Important for Laser Products Table of Contents Troubleshooting Care And Maintenance Introduction FeaturesHow This Manual Is Organized How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting a Powered Subwoofer Connecting the Speakers SP-FSX3Connecting an MD Recorder, etc Optical Digital Output Connecting an External EquipmentAutomatic Power On Basic Operations Turning the Power On and OffChanging the Source Power Saving Mode Dimmer at Power Off Adjusting the Brightness Dimmer at Power OnAdjusting the Volume Fade-out Muting Fade MutingNo signal condition Auto Power Off A.P.offTo disable the A.P.off function Entering the Number with the Remote Control Numeric KeysTuning In a Station Using the TunerSelect a station using one of the follow- ing methods One Touch RadioTo Change the FM Reception Mode Presetting StationsTo change the preset stations, repeat the same Beat Cut AM ReceptionWhen playing a CD-R or CD-RW Using the CD PlayerTo Insert a CD Quickest Way To Start a CD Is With the One Touch OperationTo Unload a CD Basics of Using the CD Player Normal PlayProgramming the Playing Order of the Tracks Program Play To Modify the Program Press the CD 6button on the Remote ControlRandom Play Repeat to program the other tracksLocking the CD door Repeating TracksUnlocking the CD door Turn off the systemListening to External Equipment Using External EquipmentsChanging the Equipment’s Name To exit the source LINE, select other source e.g. CDWhen the source is LINE, press and hold the SET button Adjusting the Input LevelPress the SET button to finish the adjustment Recording the System’s Source to External EquipmentSetting the Clock Using the TimersPress the CLOCK/TIMER button Press the 3 or 2 button to set the hourPerform steps 2 to 5 in Setting the Clo- ck on Setting the Daily TimerShowing the Clock Display Correcting the ClockSetting the OFF time Example Setting the on time ExampleSelecting the music source Setting the volume level Turning the Daily Timer On and OffPress the Cancel button Select the Fade functionTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for a few secondsSymptom TroubleshootingPossible Cause ActionCare And Maintenance Specifications 0503MNMCREJEM

LVT1040-008A specifications

The JVC LVT1040-008A is a remarkable piece of technology that stands out in the audio equipment market, particularly favored by enthusiasts who value high-quality sound reproduction. This model exemplifies the fusion of innovative engineering and user-friendly design, making it a popular choice among both audio professionals and casual listeners.

One of the main features of the JVC LVT1040-008A is its advanced audio processing capabilities. It is equipped with state-of-the-art digital signal processing technology that allows for precise sound manipulation. This ensures that users experience a rich and dynamic audio output, regardless of the source material. With the ability to deliver clear highs and deep lows, this model is designed to meet the demands of various audio genres, from classical symphonies to modern electronic music.

Another significant characteristic of the LVT1040-008A is its versatility in connectivity options. This unit supports various input formats, including USB, optical, and analog connections, providing seamless integration with different audio devices such as smartphones, laptops, and gaming consoles. This feature enhances its usability, making it an ideal companion for both home entertainment systems and portable audio setups.

In terms of build quality, the JVC LVT1040-008A boasts a robust and aesthetically pleasing design. The materials used are durable yet lightweight, ensuring the device can withstand regular use while maintaining an attractive appearance. Additionally, the intuitive control layout allows users to navigate settings easily, ensuring a smooth user experience.

Furthermore, this model incorporates energy-efficient technologies, contributing to its eco-friendly footprint without compromising performance. It is engineered to minimize power consumption, making it a sustainable option for consumers who are environmentally conscious.

Lastly, the JVC LVT1040-008A is supported by a comprehensive warranty and customer support system, giving users peace of mind regarding their investment. Overall, this audio device is a blend of functionality, style, and high-quality sound, making it a noteworthy option in the competitive audio equipment landscape.
Top Page Image Contents