JVC LVT1040-008A Presetting Stations, To Change the FM Reception Mode, Beat Cut AM Reception

Page 15

Using the Tuner

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM sta- tions.

•Preset numbers may have been set to factory test fre- quencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below.

1

 

 

STORED

FM/AM

 

 

 

SET

+10

2

SET

or

FM = 30, AM = 15

When changing the Band

On the Remote Control

1 Select a band by pressing the FM/AM button.

2 Press the 5 or ∞ button to tune in a sta- tion.

3 Press the SET button.

Preset number “1” will blink for 5 seconds. Within 5 seconds, proceed to the next step.

When the display returns to the one set in step 2 after 5 seconds, press the SET button again.

4 Press the Numeric Keys, or the 3 or 2 button within 5 seconds to select the preset number.

Example:

5 Press the SET button within 5 seconds.

“STORED” appears and after 2 seconds, the display re- turns to the broadcast frequency display.

6 Repeat above steps 1 to 5 for each sta- tion you want to store in memory with a preset number.

To change the preset stations, repeat the same

steps as above.

CAUTION:

•Even if the system is unplugged or if the power failure occurs, the preset stations will be stored for about 24 hours. However, in case the preset stations are erased, you will need to preset the stations again.

To Change the FM Reception Mode

When you are tuned into an FM stereo broadcast, the “ST.” indicator lights up and you can hear stereo effects.

If an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose stereo effect.

FM AUTO mode is also useful to suppress static noise be- tween stations.

To enter Monaural mode while receiving an FM broadcast, press the FM/PLAY MODE button on the Re- mote Control until “FM MONO” appears on the display. Then, the “MONO” indicator lights up.

Each time you press the FM/PLAY MODE button, the display alternates between “FM AUTO” and “FM MONO”.

FM/PLAY

MODE

FM AUTO Ô FM MONO

To restore the stereo effect, press the FM/PLAY MODE button on the Remote Control until “FM AUTO” ap- pears on the display. Then, the “MONO” indicator goes out and the “ST.” indicator will light up.

Beat Cut (AM Reception)

Switching the Beat Cut mode may reduce beat noise.

Each time you press the FM/PLAY MODE button while re- ceiving an AM broadcast, the Beat Cut mode changes as fol- lows.

BEAT CUT 1 = BEAT CUT 2 = BEAT CUT 3 = BEAT CUT 4 = (back to the beginning)

FM/PLAY

MODE

Set to the position where beat noise is small.

•The best position will differ depending on the AM broadcast station being received.

•In AM broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna for best reception.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents FS-X3 Important for Laser Products Table of Contents Troubleshooting Care And Maintenance Features IntroductionHow This Manual Is Organized Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting a Powered Subwoofer Connecting the Speakers SP-FSX3Connecting an External Equipment Connecting an MD Recorder, etc Optical Digital OutputAutomatic Power On Turning the Power On and Off Basic OperationsChanging the Source Fade-out Muting Fade Muting Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys Auto Power Off A.P.offNo signal condition To disable the A.P.off functionOne Touch Radio Using the TunerTuning In a Station Select a station using one of the follow- ing methodsBeat Cut AM Reception Presetting StationsTo Change the FM Reception Mode To change the preset stations, repeat the sameQuickest Way To Start a CD Is With the One Touch Operation Using the CD PlayerWhen playing a CD-R or CD-RW To Insert a CDBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Repeat to program the other tracks Press the CD 6button on the Remote ControlTo Modify the Program Random PlayTurn off the system Repeating TracksLocking the CD door Unlocking the CD doorTo exit the source LINE, select other source e.g. CD Using External EquipmentsListening to External Equipment Changing the Equipment’s NameRecording the System’s Source to External Equipment Adjusting the Input LevelWhen the source is LINE, press and hold the SET button Press the SET button to finish the adjustmentPress the 3 or 2 button to set the hour Using the TimersSetting the Clock Press the CLOCK/TIMER buttonCorrecting the Clock Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Showing the Clock DisplaySetting the on time Example Setting the OFF time ExampleSelecting the music source Select the Fade function Turning the Daily Timer On and OffSetting the volume level Press the Cancel buttonWait for a few seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonAction TroubleshootingSymptom Possible CauseCare And Maintenance Specifications 0503MNMCREJEM

LVT1040-008A specifications

The JVC LVT1040-008A is a remarkable piece of technology that stands out in the audio equipment market, particularly favored by enthusiasts who value high-quality sound reproduction. This model exemplifies the fusion of innovative engineering and user-friendly design, making it a popular choice among both audio professionals and casual listeners.

One of the main features of the JVC LVT1040-008A is its advanced audio processing capabilities. It is equipped with state-of-the-art digital signal processing technology that allows for precise sound manipulation. This ensures that users experience a rich and dynamic audio output, regardless of the source material. With the ability to deliver clear highs and deep lows, this model is designed to meet the demands of various audio genres, from classical symphonies to modern electronic music.

Another significant characteristic of the LVT1040-008A is its versatility in connectivity options. This unit supports various input formats, including USB, optical, and analog connections, providing seamless integration with different audio devices such as smartphones, laptops, and gaming consoles. This feature enhances its usability, making it an ideal companion for both home entertainment systems and portable audio setups.

In terms of build quality, the JVC LVT1040-008A boasts a robust and aesthetically pleasing design. The materials used are durable yet lightweight, ensuring the device can withstand regular use while maintaining an attractive appearance. Additionally, the intuitive control layout allows users to navigate settings easily, ensuring a smooth user experience.

Furthermore, this model incorporates energy-efficient technologies, contributing to its eco-friendly footprint without compromising performance. It is engineered to minimize power consumption, making it a sustainable option for consumers who are environmentally conscious.

Lastly, the JVC LVT1040-008A is supported by a comprehensive warranty and customer support system, giving users peace of mind regarding their investment. Overall, this audio device is a blend of functionality, style, and high-quality sound, making it a noteworthy option in the competitive audio equipment landscape.
Top Page Image Contents