1.Remove contents from tank
1
2.Correctly identify each pole section and mark indicated distance from ends with tape as shown.
4
TOP
TAPE (Not Supplied)
6
BOTTOM
5”
(13 cm)
3.IMPORTANT! Center the alignment slot of bottom pole section (6) in the lower hole of top pole section (4) as shown. While maintaining alignment, bounce top section of pole (4) and bottom section (6) together as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a
6
4
WOOD SCRAP 
9 | 04/03 | P/N 211984A |
|