JVC HX-Z30 Using Recording Timer, How Recording Timer actually works, Select the preset station

Page 28

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically.

How Recording Timer actually works

The unit automatically turns on, tunes in to the specified station, sets the volume level to “VOLUME MIN,” and starts recording when the on-time comes. (“REC” and the REC indicator on the display flash just before the on-time. The REC indicator continues flashing while the timer is operating). Then, when the off-time comes (“REC OFF” appears on the display just before the off-time), the unit automatically turns off (standby).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

•To correct a mistake while setting the timer, press

CANCEL/DEMO.

On the unit ONLY:

1 Insert a recordable cassette with the exposed part of the tape down.

2 Press CLOCK/TIMER repeatedly

until “REC” appears on the display. CLOCK

/TIMER

The (Timer) indicator lights up and the REC (Recording Timer) indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

DAILY TIMER REC

(Daily Timer setting)

Canceled

 

Clock

 

 

TIMER

 

 

 

 

setting

(Recording Timer setting)

(The hour digits start flashing.)

4 Set the on-time you want the unit to turn on at.

 

E

1) Turn ¢ / 4 to set the hour,

PR SET

 

then press SET/DISPLAY.

 

2)Turn ¢ / 4 to set the minute, then press SET/DISPLAY. “SET” appears for about 1 second, then the unit enters off- time setting mode.

SET

/DISPLAY

5 Set the off-time you want the unit to turn off (standby) at.

1)Turn ¢ / 4 to set the hour, then press

SET/DISPLAY.

2)Turn ¢ / 4 to set the minute, then press

SET/DISPLAY.

“SET” appears for about 1 second, then the unit enters preset station selecting mode.

6 Select the preset station.

1)Turn ¢ / 4 to select the band (“TUNER FM” or “TUNER AM”), then press SET/DISPLAY.

“SET” appears for about 1 second.

2)Turn ¢ / 4 to select a preset channel number, then press SET/DISPLAY.

The REC (Recording Timer) indicator stops flashing and remains lit. “OK ” appears on the display for about 2 seconds.

The settings you have done are shown on the display in sequence for your confirmation.

7 Press to turn off the unit STANDBY (standby) if necessary.

3 Press CLOCK/TIMER again.

“TIMER” appears for about 2 seconds, then the unit enters on-time setting mode.

CLOCK /TIMER

•If you want to listen to another source while recording Press REC START/STOP or 7 to stop recording. Without stopping it, you cannot change the source.

•Even if you unplug the AC power cord or if a power failure occurs

Once you set the timer, the timer setting may remain stored in memory for a few days. Check whether or not the timer setting still remains.

25

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront Panel Display Window ROCK, POP, ClassicRemote Control Remote ControlSupplied Accessories Connecting Antennas Putting the Batteries into the Remote Control FM antennaGetting Started To connect an outdoor FM antennaConnecting Speakers AM antennaTo connect an outdoor AM antenna Close the speaker terminalsConnecting Other Equipment Canceling the DemonstrationTo connect an external audio component To start demonstration manuallyTurning On or Off the Power Setting the ClockCommon Operations Selecting the SourcesSelecting the Sound Modes Adjusting the VolumeReinforcing the Bass Sound To use your own sound mode Creating Your Own Sound Mode-User ModeTurning On or Off the Key-touch Tone Tuning in to a Station Tuning in to a Preset StationPresetting Stations To change the FM reception modeWhen playing a CD-R or CD-RW Disc Play IntroductionAbout MP3 MP3 disc structureHow are MP3 files recorded and played back? Playing Back Discs Loading DiscsPlaying Back the Entire Discs-Continuous Play For audio CDsBasic Disc Operations To stop play for a momentTo go to another track To locate a particular point in a trackProgramming the Playing Order of the Tracks -Program Play Playing at Random-Random Play To check the program contentsTo modify the program Repeating Tracks or Discs-Repeat Play Prohibiting Disc Ejection-Tray LockPress Repeat during or before play During Program PlayPlaying Back a Tape Playing Back TapesLocating the Beginning of a Song-Music Scan To record on both sides-Reverse Mode RecordingRecording on a Tape To protect your recordingSynchronized Recording Load a disc Select a discUsing Daily Timer Using the TimersHow Daily Timer actually works To turn on or off Daily Timer after it has been set How Recording Timer actually works Using Recording TimerSelect the preset station Using Sleep Timer Timer PriorityTo turn on or off Recording Timer after it has been set How Sleep Timer actually worksMaintenance Cleaning the unitGeneral Notes Handling discsTroubleshooting SymptomSpecifications Amplifier section-CA-HXZ30Amplifier section-CA-HXZ10 Limited Warranty Authorized Service Centers  2003 Victor Company of JAPAN, Limited 0203MWMMDWJEM Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses For Canada/pour le Canada English Contents Location of the Buttons and Controls Display Window Remote Control Supplied Accessories Putting the Batteries into the Remote ControlFor better rece ption of both FM and AM When y ou press other b uttons STANDBY/ON on the remote Minutes, thenControl so that the Standby lamp Goes off Press Sound Turbo Creating Your Own Sound Mode-User Mode Listening to FM and AM Broadcasts Disc Play Introduction How are MP3 files recorded and played back? Playing Back Discs Select a group and track to start PlayingProgramming the Playing Order of the Tracks -Program Play Load a disc Press Repeat during or before play Locating the Beginning of a Song-Music Scan Turn off the unit, and use a head demagnetizer available at Synchronized Recording Using the Timers To turn on or off Daily Timer after it has been set Using Recording Timer Using Sleep Timer Maintenance Troubleshooting Specifications Amplifier section-CA-HXZ10 EN, FR  2003 Victor Company of JAPAN, Limited 0203MWMMDWJEM

HX-Z30 specifications

The JVC HX-Z30 is a compact and stylish audio system designed for music enthusiasts seeking an impressive sound experience without sacrificing space. This all-in-one system combines various functionalities, making it an excellent addition to any modern home setup.

One of the standout features of the HX-Z30 is its sleek design. The unit boasts a modern aesthetic, featuring a glossy finish and user-friendly interface. It can easily blend in with any home décor, making it an attractive piece of furniture as well as a high-quality audio system.

The HX-Z30 comes equipped with a powerful integrated amplifier that delivers clear and vibrant audio across a wide frequency range. Users can enjoy deep bass, crisp highs, and overall balanced sound quality, which enhances the listening experience for all genres of music. This model also features a subwoofer output for those who desire an even more robust bass response.

Connectivity is another key highlight of the JVC HX-Z30. With Bluetooth capability, users can effortlessly stream music directly from their smartphones, tablets, or other Bluetooth-enabled devices. The system also includes a USB port for direct playback of audio files stored on USB flash drives, allowing for easy access and playback of digital music collections.

For those who still appreciate physical media, the HX-Z30 is equipped with a CD player that supports various disc formats, allowing users to enjoy their favorite CDs with high-quality sound. The radio function supports both FM and AM frequencies, enabling users to tune in to their favorite stations or discover new ones.

The JVC HX-Z30 incorporates advanced sound technologies, such as a built-in equalizer, enabling users to customize their audio experience according to their personal preferences. This feature allows for adjustments in bass, treble, and mid-range frequencies, ensuring an optimal listening experience in any environment.

Moreover, the system is designed for ease of use, featuring intuitive controls and an easy-to-read display. The remote control further enhances convenience, allowing users to manage their audio experience from a distance.

In conclusion, the JVC HX-Z30 is a versatile audio system that offers a range of features and technologies designed to meet the demands of contemporary listeners. With its attractive design, multiple connectivity options, and superior sound quality, it provides an exceptional listening experience for anyone who loves music.
Top Page Image Contents