JVC HX-Z30 manual Programming the Playing Order of the Tracks -Program Play

Page 56

English

Programming the Playing Order of the Tracks —Program Play

You can arrange the playing order of the tracks before you start playing. You can program up to 100 tracks.

•To use Repeat Play (see page 19) for Program Play, press REPEAT after starting Program Play. Only REPEAT 1 and REPEAT ALL can be selected for Program Play.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1 Load discs.

•If the current playing source is not the CD player, press CD 3¥8, then 7 before going to the next step.

2 Activate Program Play.

On the unit:

Press CD PLAY MODE repeatedly CD PLAY MODE until “CD PROGRAM” appears on the display.

•Each time you press the button, the play mode changes as follows:

CD PROGRAM

 

CD RANDOM

 

Total track number and total playing time (Continuous Play)

4 Select a track from the selected disc in step 3.

•Program step numbers exceeding 100 cannot be programed.

•When making programs from MP3 discs, the unit only recognizes tracks like audio CD. You cannot make programs using group numbers.

On the unit:

Turn ¢ / 4 to

E

 

PR SET

select the track

SET

number, then

/DISPLAY

 

press

 

SET/DISPLAY.

 

On the remote control:

Press the number buttons.

•For how to use the number buttons, see “To go to another track directly using the number buttons” on page

FM MODE

16.

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

On the remote control:

Press PROGRAM so that

 

 

 

 

 

 

 

 

 

 

5

 

PROGRAM

“CD PROGRAM” appears

PROGRAM

CANCEL

 

 

REC

TAPE

on the display.

 

 

DOM START/STOP

 

 

 

 

 

 

The PROGRAM indicator lights up on the display.

•If a program has been stored in memory, the program is called up.

6 Press CD 3¥8.

CD

The tracks are played in the order you have programed.

•If the playing disc is an MP3 disc, the MP3 indicator lights up.

To stop playing, press 7.

To exit from Program Play, press CD PLAY MODE repeatedly until the PROGRAM indicator goes off (or press PROGRAM on the remote control) after playback stops.

3 Press one of the disc number buttons (CD1 – CD5) to select the disc you want.

CD1 CD2 CD3 CD4 CD5

Track number Program step number

Disc number

•If you try to program a 101st track, “CD FULL” appears on the display.

•If you have tried to program a track from an empty tray, “NO READ # (number)” or “NO DISC # (number)” will appear on the display for 2 seconds.

•If you have tried to program a track number that does not exist, it is ignored.

•If you try to open a disc tray during Program Play, the disc tray does not come out. Open disc trays after canceling Program Play.

17

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Display Window ROCK, POP, ClassicRemote Control Remote ControlSupplied Accessories Connecting Antennas Putting the Batteries into the Remote Control FM antennaGetting Started To connect an outdoor FM antennaConnecting Speakers AM antennaTo connect an outdoor AM antenna Close the speaker terminalsConnecting Other Equipment Canceling the DemonstrationTo connect an external audio component To start demonstration manuallyTurning On or Off the Power Setting the ClockCommon Operations Selecting the SourcesReinforcing the Bass Sound Adjusting the VolumeSelecting the Sound Modes Turning On or Off the Key-touch Tone Creating Your Own Sound Mode-User ModeTo use your own sound mode Tuning in to a Station Tuning in to a Preset StationPresetting Stations To change the FM reception modeWhen playing a CD-R or CD-RW Disc Play IntroductionAbout MP3 MP3 disc structureHow are MP3 files recorded and played back? Playing Back Discs Loading DiscsPlaying Back the Entire Discs-Continuous Play For audio CDsBasic Disc Operations To stop play for a momentTo go to another track To locate a particular point in a trackProgramming the Playing Order of the Tracks -Program Play To modify the program To check the program contentsPlaying at Random-Random Play Repeating Tracks or Discs-Repeat Play Prohibiting Disc Ejection-Tray LockPress Repeat during or before play During Program PlayLocating the Beginning of a Song-Music Scan Playing Back TapesPlaying Back a Tape To record on both sides-Reverse Mode RecordingRecording on a Tape To protect your recordingSynchronized Recording Load a disc Select a discHow Daily Timer actually works Using the TimersUsing Daily Timer To turn on or off Daily Timer after it has been set Select the preset station Using Recording TimerHow Recording Timer actually works Using Sleep Timer Timer PriorityTo turn on or off Recording Timer after it has been set How Sleep Timer actually worksMaintenance Cleaning the unitGeneral Notes Handling discsTroubleshooting SymptomSpecifications Amplifier section-CA-HXZ30Amplifier section-CA-HXZ10 Limited Warranty Authorized Service Centers  2003 Victor Company of JAPAN, Limited 0203MWMMDWJEM Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses For Canada/pour le Canada English Contents Location of the Buttons and Controls Display Window Remote Control Supplied Accessories Putting the Batteries into the Remote ControlFor better rece ption of both FM and AM When y ou press other b uttons Control so that the Standby lamp Goes off Minutes, thenSTANDBY/ON on the remote Press Sound Turbo Creating Your Own Sound Mode-User Mode Listening to FM and AM Broadcasts Disc Play Introduction How are MP3 files recorded and played back? Playing Back Discs Select a group and track to start PlayingProgramming the Playing Order of the Tracks -Program Play Load a disc Press Repeat during or before play Locating the Beginning of a Song-Music Scan Turn off the unit, and use a head demagnetizer available at Synchronized Recording Using the Timers To turn on or off Daily Timer after it has been set Using Recording Timer Using Sleep Timer Maintenance Troubleshooting Specifications Amplifier section-CA-HXZ10 EN, FR  2003 Victor Company of JAPAN, Limited 0203MWMMDWJEM

HX-Z30 specifications

The JVC HX-Z30 is a compact and stylish audio system designed for music enthusiasts seeking an impressive sound experience without sacrificing space. This all-in-one system combines various functionalities, making it an excellent addition to any modern home setup.

One of the standout features of the HX-Z30 is its sleek design. The unit boasts a modern aesthetic, featuring a glossy finish and user-friendly interface. It can easily blend in with any home décor, making it an attractive piece of furniture as well as a high-quality audio system.

The HX-Z30 comes equipped with a powerful integrated amplifier that delivers clear and vibrant audio across a wide frequency range. Users can enjoy deep bass, crisp highs, and overall balanced sound quality, which enhances the listening experience for all genres of music. This model also features a subwoofer output for those who desire an even more robust bass response.

Connectivity is another key highlight of the JVC HX-Z30. With Bluetooth capability, users can effortlessly stream music directly from their smartphones, tablets, or other Bluetooth-enabled devices. The system also includes a USB port for direct playback of audio files stored on USB flash drives, allowing for easy access and playback of digital music collections.

For those who still appreciate physical media, the HX-Z30 is equipped with a CD player that supports various disc formats, allowing users to enjoy their favorite CDs with high-quality sound. The radio function supports both FM and AM frequencies, enabling users to tune in to their favorite stations or discover new ones.

The JVC HX-Z30 incorporates advanced sound technologies, such as a built-in equalizer, enabling users to customize their audio experience according to their personal preferences. This feature allows for adjustments in bass, treble, and mid-range frequencies, ensuring an optimal listening experience in any environment.

Moreover, the system is designed for ease of use, featuring intuitive controls and an easy-to-read display. The remote control further enhances convenience, allowing users to manage their audio experience from a distance.

In conclusion, the JVC HX-Z30 is a versatile audio system that offers a range of features and technologies designed to meet the demands of contemporary listeners. With its attractive design, multiple connectivity options, and superior sound quality, it provides an exceptional listening experience for anyone who loves music.
Top Page Image Contents