JVC MX-KC2 manual To Load CDs To Unload CDs, Changing the MP3 Playback Mode, About Disc Indicator

Page 15

Using the CD Player

About Disc Indicator:

Selected Disc indicator

Disc Number indicator

Disc Rotation indicator

The Disc indicator consists of the following three kinds of indicators:

Disc Number indicator: Lights all the time.

Selected Disc indicator:Lights for the currently selected disc number.

Disc Rotation indicator:Runs when the selected CD is playing. This indicator goes out if a CD is not loaded for the selected disc number.

One Touch Play

The power comes on, and operations are done automatically.

❏By pressing the CD 6button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track.

❏By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track.

To Load CDs

To Unload CDs

Take out the CD as shown below.

1 While the CD Player is stopped, press the CD Open/Close 0button on the Unit to open the tray.

2 Remove the CD, then press the DISC SKIP button on the Unit.

The tray turns for the next CD.

3 Repeat step 2 to remove all the CDs.

4 Press the CD Open/Close 0 button on the

Unit to close the tray.

❏You can remove CDs while listening to the other source.

Tips:

• Removing/changing the CDs during playback

While playing back a CD (e.g. CD1), you can remove or change the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close 0 button. After removing or changing, press the same button to close the tray.

Changing the MP3 Playback Mode

When playing an MP3 disc, you can choose the playback mode of the MP3 disc as follows:

English

1 Press the CD Open/Close 0 button on the

Unit to open the tray.

2 Place one or two CDs, with its label side up, onto the tray.

Be sure that the CD is securely seated inside the recess on the disc tray.

With the label side up

3 Press the DISC SKIP button on the Unit and place the next CD.

When you press the button, the tray turns for the next CD.

4 Press the CD Open/Close 0 button on the

Unit.

The tray is closed.

Normal (FILE) mode:

The unit recognizes only tracks (files). You can play an MP3 disc like an Audio CD.

GROUP (ALBUM) mode:

The unit recognizes tracks (files) and albums (folders) on an MP3 disc. You can play an MP3 disc according to the way how they are grouped.

On the Remote Control ONLY:

Press MP3 before or during playing an MP3 disc.

GROUP indicator appears when the MP3 playback mode is the GROUP mode.

•Each time you press the button, the MP3 playback mode changes between “GROUP (ALBUM)” and “Normal (FILE)” alternately.

❏When you use an 8 cm CD, place it on the inner circle of the tray.

❏You can load CDs while listening to the other source or while listening to the CD being played back.

❏When power is turned off with the tray opened, the tray is auto- matically closed.

❏If the CD cannot be read correctly (because it is scratched, for example), the CD is recognized as no disc.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MX-KC2 For U.S.A Mises en garde, précautions et indications diverses’AVERTISSEMENT Placée À L’INTERIEUR DE L’APPA Class 1 Laser Product Produit Laser ClasseFeatures IntroductionHow This Manual Is Organized Table of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not supplied Connecting the AM Antenna Connecting the SpeakersRear Panel of the Unit Compu Play Connecting External EquipmentConnecting to the Wall Outlet Demo ModeBasic Operations Turning the Power On and OffECO Mode ECO Adjusting the VolumeReinforcing the Bass Sound Active Bass EX Entering the Number with the Remote Control Numeric KeysSelecting the Sound Mode Fade-out Muting Fade Muting One Touch Radio Using the Tuner Tuning In a Station Select a station using one of the following methodsPress the 4 or ¢ button to select the preset number Presetting StationsTo Change the FM Reception Mode Using the UnitMore about MP3 discs Using the CD PlayerWhen playing a CD-R or CD-RW For MP3 discsTo Load CDs To Unload CDs Changing the MP3 Playback ModeAbout Disc Indicator On the Remote Control onlyTo Select a Track Basics of Using the CD Player- Normal PlayTo Select a Group For MP3 Group mode only To Play CDsTo Exit and Re-enter Program Play Programming the Playing Order of the TracksTo Make a Program To Play the Program You Have MadeRandom Play Tray Lock Function Repeating TracksResume Play for MP3 Disc Close the cassette holder gently Using the Cassette Deck Listening to a TapePlaying a Tape To Fast-Wind a TapeProgram CD REC Start Dubbing Tape B Random Tape a Using the Cassette Deck RecordingThings To Know Before You Start Recording Tape a REC START/STOP Tape B Push OpenTo Record Any Sound Source to Tape Standard RecordingTape to Tape Recording DUB- Bing CD Synchro RecordingUsing an External Equipment Listening to the External EquipmentAUX Using the Timers Setting the ClockFixing the Clock Selecting the music source Setting the Daily TimerSetting the OFF time Example PM Setting the on time Example AMTurning the Daily Timer On and Off Setting the REC Recording TimerTurning the REC Recording Timer On and Off Wait for 5 seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonCare And Maintenance Specification Troubleshooting0305NYMCREBET
Top Page Image Contents