Spalding M611411 manual FIG. a

Page 8

IMPORTANT!

ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART

2. Align poles using alignment marks. First, pound top and middle poles together by bouncing them on a scrap piece of wood on the ground as shown in FIG A. until they no longer move toward pole identification stickers. THEN add bottom pole section and pound together in the same way FIG B.

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 3-3/4" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 2-1/2"

MINIMUM OVERLAP, LEAVING 1- 1/4" BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

FIG. A.

4

5

 

IMPORTANT!

TROUGH

 

GORGE

 

RINNE

 

TROUGH

CANAL

1-1/2"

5"

ID

STICKER

 

 

DIMPLE

 

HOLE

Wood Scrap

(NOT SUPPLIED)

FIG. B.

4

5

6

ID# M611411 12/05

8

Image 8
Contents Write Model Number From Box Here Height Adjustment Safety Instructions Front View Parts List Parts IDENTIFIER- Actual Size Section a Assemble the Poles FIG. a Section B Assemble the Base FIG B Knob 17 as shown. Repeat for other side Board Style Install Slam Jam Rim to Backboard Attach net Feet