Spalding M611411 manual Safety Instructions

Page 3

SAFETY INSTRUCTIONS

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR

PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and follow these rules for safe operation of the system.

To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use, and supervision are essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly.

If using a ladder during assembly, use extreme caution.

Check base regularly for leakage. Slow leaks could cause the system to tip over unexpectedly

Seat the pole sections properly (if applicable). Failure to do so could allow the pole sections to separate during play and/or during transport of the system.

Climate, corrosion or misuse could result in system failure.

If technical assistance is required, contact Customer Service.

Minimum operational height is 6'-6" (1.98m) to the bottom of backboard.

Most injuries are caused by misuse and/or not following instructions.

Use caution when using this unit.

NOTICE TO ASSEMBLERS

ALL basketball systems, including those used for DISPLAYS, MUST be assembled and ballasted

with sand or water according to instructions. Failure to follow instructions could result in

SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system.

IMPORTANT!

Remove all contents from boxes.

Be sure to check inside pole sections; hardware and additional parts are packed inside.

 

WARRANTY CARD:

 

 

 

Please remember to complete your product registration form either

 

on-line at:

 

 

 

www.huffysports.com/customer_support/product_registration

 

or mail-in the enclosed postcard.

 

 

3

12/05

ID#

M611411

Image 3
Contents Write Model Number From Box Here Height Adjustment Safety Instructions Front View Parts List Parts IDENTIFIER- Actual Size Section a Assemble the Poles FIG. a Section B Assemble the Base FIG B Knob 17 as shown. Repeat for other side Board Style Install Slam Jam Rim to Backboard Attach net Feet