3. • Fit rim (25) securely into bracket (23) as shown.
• Install reinforcement bracket (1) onto “T” bolt (18) as shown.
• Install spring (16) onto “T” bolt (18) as shown.
• Install special nut (17) and washer (15) onto “T” bolt (18).
25
17 
18
NOTE: | 15 | |
Peel protective | ||
film from surface | 16 | |
of acrylic | ||
backboard prior to | 1 | |
use. | ||
|
NOTE:
Tighten nut (17) until flush with end of "T" bolt (18) as shown here.
23
4. Attach cover (2) to rim using screws (3).
3
25
5. Apply logo label (8) to rim cover (2).
2 
2
8
7 | 09/06 | ID# M890001 |