4.IMPORTANT! Center the alignment slot of lower pole section (6) in the lower hole of middle pole section (4) as shown. While maintaining alignment, bounce top and middle pole assembly (4 & 5) onto bottom section of pole (6) using wood scrap as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a
5 | 4 |
|
5
6 
6 
WOOD SCRAP
5.Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
7
6 | 5 | 4 |
|
| |
8 |
|
|
6
7
8 
P/N 214994B 05/03 | 10 |