6 |
1 |
WARNING! |
REMOVE BACKBOARD AND RIM BEFORE REMOVING POLE FROM GROUND SLEEVE. REQUIRES TWO PEOPLE TO REMOVE POLE.
WARNING!
TWO PEOPLE REQUIRED FOR THIS
PROCEDURE. FAILURE TO FOLLOW
THIS WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
Remove pole cap from bottom pole section and insert
12. clamp cover (6) onto bottom section. Bend back exposed top flange sections of secured ground sleeve
(1) as shown. Then insert pole into ground sleeve (1).
13.Secure clamps (4) around pole section as shown. Refer to Step 4. Tighten completely.
6 |
14. | Lower clamp cover (6) over clamps and snap into |
| proper position. |
|
|
6
ID# 21112201 11/05 | 10 |