Wenger 70832 instruction manual Setting the Time and Date, Position

The numerals in the inner ring (primary tide indicator)		1
indicate the approximate number of hours until the		0
respective tides (example at right: the Tide Indicator Hand	1
is pointing to the number “2” in the blue field, indicating
that there are approximately 2 hours until High Tide in
the primary location). The numerals on the bezel provide
the same function for the secondary location.

Position 1

	1
	2
	3
	4
7	5

Position 2

	1
	2
	3
	4
7	5

Position 3

	1
	2
	3
	4
7	5

We suggest that you set your Wenger Tide Watch in the following order:

1.Date

2.Time

3.Moon Phase

4.Primary Tide Location

5.Secondary Tide Location (when desired)

6

Setting the Time and Date

Important note: Your watch features a screw-down crown which ensures water resistance. Rotate the crown counterclockwise until the crown moves away from the watch. This will set the crown in Position 1. Always screw down the crown after making any adjustments. This is very important.

1.Pull out the crown to Position 2 (one “click” out). Rotate crown clockwise until the date shows one day earlier than the date you want to set.

2.Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch hands move clockwise until the current date shows. Then set the watch hands to the correct time. Turn the watch hands past 12 once if you’re set- ting the watch for a P.M. time.

3.Return the crown to Position 1. Then screw it down fully.

7