JVC HX-Z10 manual Playing Back Discs, Loading Discs, Playing Back the Entire Discs-Continuous Play

Playing Back Discs

Loading Discs

On the unit ONLY:

1 Press 0 for the disc tray (CD1 – CD5) you want to load a disc onto.

The unit automatically turns on and the disc tray comes out.

CD1 CD2 CD3 CD4 CD5

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0 you have pressed in step 1. The disc tray closes.

When loading more than one disc

When you press 0 for the next tray you want to place another disc onto, the first disc tray automatically closes and then the next tray comes out.

Playing Back the Entire Discs—Continuous Play

You can play discs continuously.

•If you start Continuous Play with an MP3 disc, you can select a track to start playback.

7For audio CDs

1 Load discs.

2 Press one of the corresponding disc number buttons (CD1 – CD5) for the disc you want to play.

CD1 CD2 CD3 CD4 CD5

The unit searches for the disc, and starts playing with the first track of the selected disc.

Track number Elapsed playing time

Tracks of the currently playing CD (Track numbers exceeding 16 are not displayed.)

7For MP3 discs

1 Load discs.

2 Press one of the corresponding disc number buttons (CD1 – CD5) you load discs in step 1.

The unit searches for the disc (it may take time), and starts playing the first track of the disc.

•The MP3 indicator lights up on the display.

CD1 CD2 CD3 CD4 CD5

3 Press 7.

The group title of the 1st group appears on the display, then the group number starts flashing.

Group title of the 1st group*

Group number flashes

*If the entire group title cannot be shown (exceeds 10 characters), the title scrolls.

15