JVC HX-Z10 manual Basic Disc Operations, To stop play for a moment, To go to another track

Continued

4 Select a group and track to start playing.

1)Turn ¢ / 4 (or press ¢ (¡) / 4 (1) on the remote control) to select a group you want, then press CD 3¥8.

The track number starts flashing.

Basic Disc Operations

PR	E
	SET

While playing a disc, you can do the following operations.

To exchange discs during playback of another disc

Press 0 corresponding to a disc (CD1 – CD5), not playing or selected currently, to eject and exchange the disc.

CD1 CD2 CD3 CD4 CD5

CD

Track number flashes

2)Turn ¢ / 4 (or press ¢ (¡) / 4 (1) on the remote control) to select a track you want to start playback with, then press CD 3¥8.

Track title**

Group number Elapsed playing time

Track number

**If the entire track title cannot be shown (exceeds 10 characters), the title scrolls.

Playback starts with the selected track of the selected group.

To stop playing, press 7.

To remove the disc, press 0 for the corresponding disc tray.

If you exchange discs during play, the current play will not stop until all discs you have exchanged are played.

To stop play for a moment

Press CD 3¥8.	CD
While pausing, the elapsed playing time
flashes on the display.

To resume playing, press CD 3¥8 again.

To go to another track

For audio CDs: Before or during play

For MP3 discs: During play

Turn ¢ / 4 (or press ¢ (¡) /	E
	PR SET

4(1) on the remote control).

•¢ (or ¢ (¡)):

Skips to the beginning of the next or succeeding tracks.

• 4 (or 4 (1)):

Goes back to the beginning of the current or previous tracks.

To locate a particular point in a track

During play, press and hold ¡ or
1 (or ¢ (¡) / 4 (1)on
the remote control).	I
	T
	U
	N
/BEEP	N
• ¡ (or ¢ (¡)): Fast-forwards the	G
disc.
• 1 (or 4 (1)): Fast-reverses the disc.

Disc playback sequence

When discs* in more than one tray are loaded on the disc trays, they are played in sequence as follows:

Ex: When CD2 is pressed:

CD2 ] CD3 ] CD4 ] CD5 ] CD1 (then stops)

*When no disc is loaded on the tray, that disc number is skipped.

To go to another track directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) before or during play allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

FM MODE

For track number 15, press +10, then 5.

For track number 20, press +10, then 10.

For track number 32, press +10 three times, then 2.

For track number 132, press +10 thirteen times, then 2.

16