Coleman 9271-210 owner manual Durango Family Cabin, Assemble & Place Roof Poles

DURANGO™ FAMILY CABIN™ 20'X10'

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, position the end of tent into the wind.

–See owners manual for more tips

Instructions apply to Part Number 9271-210

Shock-corded

POLE ASSEMBLY PARTS

Center Curved Roof Poles

Part No. 9271-205

End Curved Roof Poles

Part No. 9271-206

Center Brace Poles

Part No. 9271-202

End Brace Poles

Part No. 9271-203

Rainfly Poles

Part No. 9271-204

Rainfly Part No. 9271-201

1 Layout & Positioning of Tent

–Layout and position tent with door facing desired direction. (illus. 1)

–Stake down tent, starting with the corners. Do not stretch

Center curved roof poles diagonally

through pole sleeves

too tight. Angle the stakes slightly toward the tent. (illus. 2) Keep the floor taut.

–Unzip the door.

illus. 1

Front door	End roof
	sleeve

illus. 2 Stake loops properly staked

2	Assemble & Place Roof Poles		Forms an arch
	–Assemble all shock-corded
	roof poles. When assembled will		Shock corded poles
	form a continuous arch with both
		illus. 3 Three section curved roof pole assembly.
	ends pointing down. (illus. 3)
	–Select center roof poles (longer,3 section)
	and insert them diagonally through the two
	center roof sleeves. They cross and form an
	“X”. (illus. 1 & 4)
	–Select end roof poles (shorter, 2 section).
	and insert them through the roof sleeves		Pole sleeves
	at each end of the tent. (illus. 1)

illus. 4 Curved roof pole system shown inserted diagonally through pole sleeves.