Coleman 9163-150 owner manual Lakeside 15’x10’, Connect Frame to Tent

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees. –For best results in windy conditions,

position the end of tent into the wind. –See owners manual for more tips.

Lakeside™ 15’x10’

Instructions apply to Part Number 9163-150

Main Tent Poles (Black)

Main Poles

Part No. 9163-503

Main Pole Main Tent Poles (Grey)

Part No. 9163-505

Rainfly Poles

Part No. 9163-504

Rainfly

Part No. 9163-502

1 Layout & Positioning of Tent, Pole Assembly

–Layout and position tent with door facing desired direction. (illus. 1)

–Unzip doors.

–Stake down tent corners only, using the stake loops. Keep the floor taut. (Intermediate loops will be staked later.)

–Assemble frame poles by interlocking shock-corded poles. (three poles)

–Insert the grey pole straight through the center pole sleeves in the middle of tent. Then insert black poles straight through outside pole sleeves. (illus. 1)

illus. 1

Assembled Black main poles inserted through pole sleeves

Grey main pole through center sleeves

illus. 2 Tent stake through stake loop

2 Connect Frame to Tent

–Start with the center Grey main pole. Insert the pin into the end of the grey main tent pole at tent’s edge. (illus. 3 & 4)

–Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the opposite pole end.

–Repeat for two black main poles.

Black Pole Grey Pole Black Pole

illus. 4

Tent frame set-up

illus.3 Insert pin into pole end