Coleman 2000002120 manual Before you begin, To Set Up Beach Shade, To Set Up Beach Shelter

Page 1

BEACH SHADE MODEL 2000002120

STITCH LINE

Before you begin

Read all instructions before set up.

Select a level site clear of rocks, branches, and other hard or sharp objects, to install your Beach Shade.

WARNING: Keep clear of overhead power lines.

Do not set up your Beach Shade under trees because of potential lightning strikes or falling tree limbs in inclement weather.

Secure with all stakes and guylines provided to prevent property damage or personal injury.

For best results in windy conditions, position narrow end of Beach Shade into the wind.

Enlist the help of at least one other person to assist you when it is time to assemble the Beach Shade.

Pole Descriptions

Description

Qty.

Pole

Pole

Pole

Dia.

Repair Kit

Replacement Kit

Main Poles, black

2

8.5mm

5010000541

5010000547

Crossover Pole, grey

1

9.5mm

5010000540

5010000548

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Main Poles (2)

Crossover Pole (1)

To Set Up Beach Shade

1.Unfold Beach Shade and spread out on a clean, level surface with the door facing the desired direction. Unzip door.

(Fig. 1)

Fig. 1

2. Stake down shade corners,

 

using the outside grommets on

 

the web straps. Keep the floor

 

taut. (Fig. 2)

 

Option: Use sand bags to weight

 

shelter down, see Fig. 14 & 15.

Fig. 2

3.Assemble both Main (black) Poles and the Crossover (grey) Pole by interlocking shock-corded sections.

4.Insert the black Main Poles through the pole sleeve running from the front to the back. (Fig. 3)

5.Insert the grey Crossover Pole through the pole sleeve running side to side. (Fig. 3)

Black Poles

Grey Pole

Front of the Beach Shade

Fig. 3

 

 

To Set Up Beach Shelter (continued)

6.Insert one end of the grey Crossover Pole into the grommet on the web strap on either side of front door. (Fig. 4)

Fig. 4

7.Go to opposite end of the grey pole and gradually apply pressure to the pole, forming an arch, until you are able to insert the pole tip into the grommet on the web strap. (Fig. 5)

Fig. 5

8.Go to the back of the Beach Shade and insert black Main Pole tip into the grommet on the web strap. (Fig. 6)

Fig. 6

9.From the front of the Beach Shade, gently pull the black Main Pole down until you

can insert the end into the grommet on

the web strap located above the door open ing. (Fig. 7)

 

 

 

Fig. 7

 

 

 

 

 

 

 

 

10. Repeat for the

 

 

Fig. 8

second black

 

 

 

Main Pole.

 

 

 

(Fig. 8)

 

 

 

 

 

 

 

(continued on other side)

Image 1
Contents To Set Up Beach Shelter To Set Up Beach ShadeBefore you begin Front Door Flap Rear Vent FlapTo Secure Beach Shade in Sandy Terrain To Store