Coleman 2000000435 manual Helios X, Layout & Positioning, Tent, Pole Assembly, Assemble Frame

	Helios™ X2
	part number 2000000435
POLE ASSEMBLY PARTS
Main Tent Poles (Silver)	Rainfly
Part No. 9830-1201	Part No. 9830-1401
Side Poles (Red)
Part No. 9830-1301
1 Layout & Positioning	Main Tent Poles
of Tent, Pole Assembly	Side Poles
– Layout and position tent with doors facing
desired direction. Unzip doors. (illus. 1)
– For best results in windy conditions, position
door or back of tent into the wind.
– Stake down tent corners. Keep the floor
taut. (illus. 2)
– Assemble Frame Poles by interlocking the	illus. 1
shock-corded sections. This will make two
long red Main Tent Poles and two long
silver Side Poles.	illus. 2
– Insert the two Main Tent Poles through the poles	Tent stake
sleeves with the red trim.	through Loop
– Insert the silver Side Poles through the pole
sleeves with the silver trim.
Assemble Frame	Main Tent Poles
	Side Poles
2 – Insert one end of the Main Tent Pole tips into the
grommet on webbing located at the corner of the
tent. (illus. 3), (illus. 4)
– Go to opposite end of the Main Tent Poles and
gradually apply pressure to the pole, forming an
arch, until you are able to insert the pole tip
into the grommet on the corner web. (illus. 4)
– Repeat for second pole.
– Insert one end of Side Pole into grommet on the
webbing at the side of tent and go to opposite end
of the Side Pole and gradually apply	illus. 4
pressure to the pole, forming an arch,
until you are able to insert the pole	Tent frame up
	illus. 3
tip into the grommet. (illus. 4)
– Repeat for second pole.	Insert Pole Talon on
	stake loop into pole.