7
Step 3
Steel Privacy Panel Assembly
Locate the one 5/32 x .47” bolt into the threaded hole near the top on the inside of each front leg. Unscrew each
until the bolt head is up at least 1/4” from the surface. Do the same for the bolts at the front of the bottom shelf.
A. Place the bottom edge of the panel inside the leg brackets, between the legs.
B. At the top, guide the L-slots on the sides of the panel onto the bolts on the inside of the legs.
C. Lower the panel so that the bolts in the bottom shelf come up through the keyhole slots in the bottom of the
panel. Push the bottom of the panel towards the front of the cart to lock the panel in the keyh ole slots. Be sure all
bolts are in the slots then tighten bolts securely.
Step 4
Cylinder Blocking Wire Assembly
Attach Cylinder Blocking Wire to Cabinet Bottom
with two 5/32 x .47” Bolts.
5/32 x .47” Bolt
2 pcs
To reduce the risk of serious bodily injury or death from fire or explosion:
Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinde rs not recommended for this grill.
WARNING
!
ABC