JVC FS-V100 manual Connecting the Speakers, Connecting External Equipment

Page 8

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.Open each of the terminals and insert the speaker wires firmly, then close the terminals.

2.Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked R on the System. Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked L on the System.

Right speaker (rear side)

Black

Left speaker (rear side)

L

R

SPEAKERS

IMPEDANCE

MIN 4Ω

CAUTION:

If a TV is installed near the speakers, the picture on the TV may be distorted. If this happens, set the speakers away from the TV.

Connecting External Equipment

You can connect an audio equipment — used only as a playback device.

Connect the audio output terminals on the other equipment and the LINE IN (AUX) terminals on the rear, using an audio cord (not supplied).

Pin-plug x 2	Pin-plug x 2

Signal cord (not supplied)

RL

LINE IN (AUX)

To audio output

MD recorder or

cassette deck (not supplied)

4

EN01-09.FS-V100[J]f

4

12/12/00, 10:33 AM

Image 8

Contents Compact Component System FS-V100- Consists of CA-FSV100 and SP-UXV100For U.S.A Class 1 Laser Product Produit Laser ClasseFor Canada/pour le Canada Instructions for safe use Statement in accordance with the UL standardsTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM AntennaUsing the supplied Wire Antenna Using the coaxial type connector not suppliedConnecting the Speakers Connecting External EquipmentConnecting the AC Power Cord On the Unit On the Remote ControlTurning the Power On and Off Adjusting the Volume Common OperationsTurning the System on Turning the System offAdjusting the bass level Adjusting the treble levelReinforcing the Bass Sound AHB PRO Controlling the Tone Bass/ TrebleUsing the Tuner Tuning In a StationPresetting Stations Presetting stations manuallyChanging the FM Reception Mode Presetting stations automaticallyTo restore the stereo effect, press the FM Mode button on Press the SET button within 5 secondsUsing the CD Player Inserting a CDUnloading a CD Quickest way to start a CD is with the one touch operationBasics of Using the CD Player Normal Play Programing the Playing Order of the TracksPress the Random button on the Remote Control Press the Repeat button on the Remote ControlPlaying at Random Repeating TracksUsing the Cassette Deck Listening to a Tape Reverse ModeStandard Play One touch playUsing the Cassette Deck Recording Standard RecordingThings to know before you start recording Check the recording direction for the tapeCD Direct Recording One track recordingPress the CD #/8 button twice To stop at any time during the recording process, pressUsing External Equipment AUX AHB PRO Volume +Listening to External Equipment To exit from AUX mode, select another sourceSetting the Daily Timer Using the TimersSetting the Clock Setting the Recording Timer Setting the Sleep Timer Insert a blank or erasable tape into the Cassette DeckCare and Maintenance Troubleshooting SpecificationsHOW to Locate Your JVC Service Center Don’t service it yourselfWhat YOU Must do for Warranty Service What is not CoveredJVC Company of America Division of JVC Americas Corp1200MWMMDWJEM