WEARING THE CHEST STRAP TRANSMITTER
The Chest Strap Transmitter provides constant heart rate information throughout the duration of your workout. To ensure a proper heart rate display, the chest transmitter must be prop- erly adjusted. Snap the plastic tabs at the end of the elastic belt into the holes at the end of the transmitter and adjust the strap so that the transmitter fits tightly below the pectoral muscles, as shown in the drawing.
ELECTRODES
NOTE: Users with significant chest hair may have a problem obtaining contact between the transmitter electrodes and their skin, resulting in poor performance. It may be necessary for these individuals to shave the area of their chest beneath the transmitter.
NOTE: In dry and cold climates it may take a few minutes for a layer of perspiration to form between the chest strap and the skin. Moistening the electrodes with saliva or ECG conductive gel can speed up this process.
10
SP1446IS01SPO.indd
CODING THE CHEST STRAP TRANSMITTER
The Sportline Cardio 660 features a coded chest strap trans- mitter with multiple channels to eliminate interference from other heart rate monitors when exercising in close proximity to other people, such as a group fitness class. The monitor and chest transmitter strap are already coded and paired. If you are experiencing interference and need to select an alternate code, follow these steps:
1. PRESS THE BUTTON ON THE CHEST | 2 |
STRAP TRANSMITTER to select alternate channel
1 PRESS BUTTON
2. While wearing the chest transmitter strap, PRESS the HEART RATE key to enter Heart Rate/Exercise mode.
3. PRESS & HOLD the HEART RATE Key. “Learn” will appear in the top line of the display.
4. When the monitor and chest strap | 4 |
transmitter are successfully paired, “CODED” will appear in the monitor’s display.
CARDIO 660 HEART RATE MONITOR 11
6/13/11 11:28 AM