Programming the monitor

Setting time, calendar and user profile

The Sportline Cardio 660 uses your personal profile to calculate information specific to you. The display in the programming se- quence guides you through the settings. You adjust the informa- tion being programmed by pressing Start/Stop/Reset (S/S/R) to increase or Lap/View (L/V) to decrease. You set the informa- tion and advance to the next field by pressing Mode. The display reads “Saved” when this sequence is complete. The monitor is then ready for use. You may exit the Programming Sequence at any time by Pressing & Holding the Mode key.

Press & Hold the Mode key In Time of Day mode to enter the Programming Sequence.

Setting Time & calendar

Setting Personal profile

1.	Select Gender by pressing S/S/R or L/V.
	Set and advance by pressing Mode.
2.	Adjust Year of Birth by pressing S/S/R or
	L/V. Set and advance by pressing Mode.
3.	Select Units of Measure (Imperial=LB
	or Metric=KG) by pressing S/S/R or L/V.
	Set and advance by pressing Mode.
4.	Adjust Height by pressing S/S/R or L/V.
	Set and advance by pressing Mode.
5.	Adjust Weight by pressing S/S/R or L/V.
	Set and advance by pressing Mode.
6.	Select Fat Burn Zone ON or OFF by
	pressing S/S/R or L/V. Set and advance

Increase: S/S/R

Decrease: L/V Set & advance to next setting:

Press MODE

1.Adjust Hour by pressing Start/Stop/ reset (S/S/R) or Lap View (L/V). Set and advance by pressing Mode.

2.Repeat Step 1 to set Minutes, Seconds, Month, Day and Year.

3.Select 12- or 24-hour time format by pressing S/S/R or L/V. Set and advance by pressing Mode.

4.Select Key Tone ON or OFF by press- ing S/S/R or L/V. Set and advance to personal profile by pressing Mode.

Increase: S/S/R

Decrease: L/V Set & advance to next setting:

Press MODE

	by pressing Mode.
7.	Adjust Lower Fat Burn Zone Range by
	pressing S/S/R or L/V. Set and advance
	by pressing Mode.
	Note: This is a % of Max Heart Rate (automatically
	calculated by the monitor).
8.	Adjust Upper Fat Burn Zone Range by
	pressing S/S/R or L/V. Set and advance
	by pressing Mode.
9.	Adjust Display Contrast by pressing
	S/S/R or L/V. Set by pressing Mode. The
	display will read “Saved!”

Your Sportline Cardio 660 is now ready for use!

Increase: S/S/R

Decrease: L/V Set & advance to next setting:

Press MODE

Cardio 660w Heart Rate Monitor 15