MSC Heart Rate Monitor Basic Operations, Measurement screen map, Start and stop measurement

	(2) Basic Operations
	Start and stop measurement
	Push S/S button and the unit will start measuring “Elapsed Time TM“.At the same
	time, calculation of “Trip Distance DST“and “Average Speed AVS“starts. The symbol
	of bpm in the middle display flashes while measuring. Push S/S button again and
	the unit stops measuring and calculation. "Current Speed		", "Heart Rate	",
	“Cadence	”, “Total Distance ODO“, “Maximum Heart Rate MXP“and “Maximum
Switching Functions	Speed MXS“continue to be measured and displayed regardless of the start/stop.

The upper display always shows “Current Speed ”, and the middle display always shows “Heart Rate ”. In the lower display, the selected function is displayed. Push MODE button to switch functions of the lower display. As illustrated below, the lower display changes as TM (Elapsed Time) –> Cadence C –> Clock –> AVS (Average Speed) –> Dst (Trip Distance). These five functions are called “Main functions”, and each Main function has its corresponding Sub function. (Cadence does not have Sub function.) To switch from one Main function to its sub function, hold down MODE button. To go back to Main function, push MODE button. You can not switch the Sub function to one another.

L A P

		/A	T
S	E	T

Hold Down (2sec.)

MODE

Just Push

L

T

S/S

C (S)	(S)
Cadence	Clock Time
(Current Speed)	(Current Speed)

Maximum	Elapsed Time	Average Speed	Maximum Speed
Heart Rate
		Trip Distance

Measurement screen map

Total Distance

Switching the lower display by pushing MODE button.

-6-