MSC Heart Rate Monitor user manual Other Important Features

4 Other Important Features

The following features and operations are important when you use MSC-2Dx.

Auto time feature

When this function is on, “ ” icon appears. The main unit detects the wheel rotation and automatically starts/stops measurement. In the default state, this function is off. To switch on/off this function, push SET/AT button when the lower display is either “Elapsed Time TM“, “Average Speed AVS“or “Trip Distance DST“.

Caution: When this feature is on, you cannot start/stop the measurement by button op- eration. Therefore this feature is useful only when riding bicycle. When you use this unit on your wrist as a heart rate monitor, turn off the Auto time feature.

Press

Simultaneously

Changing Upper Display

In the Default State the upper display always shows "Current Speed ". However, you

can change it to Clock or Cadence , by pressing SET/AT button and S/S button

simultaneously. If Clock comes up to the upper display, Current Speed comes down to the lower display and joins in the main function; in the same manner, if

Cadence comes up, Current Speed comes down.

*When Auto function is on, just push S/S button and the upper display changes from

"Current speed " to "Clock time " or “Cadence ”.

Reset Operation

To reset the data of “Elapsed Time TM“, “Average Speed AVS“, “Maximum Speed MXS“, “Maximum Heart Rate MXP“and “Trip Distance DST“, push S/S button and MODE button simultaneously.

Pace Arrow

When you are using the unit for cycling, the pace arrow appears in the right side of the lower display. The pace arrow indicates whether the current speed is higher or lower than the average speed. When the average speed is zero, no arrow appears.

Power Saving Feature

When the main unit is left without receiving any signal or there is no button operation for about 15 minutes, power is shut down and the unit will be in “sleep” state, displaying only clock. By receiving signal from the wheel, or by a press of any button other than LT button, the screen returns to normal.

LT button

When you push this button, the screen will illuminate for 3 seconds.

MSC-2Dx provides you various functions such as “Record memory feature” and “Heart rate target zone”. For more detail of these functions, read the user manual.

-8-