Playing discs
Playback
(Refer to page 17 for playing MP3/WMA and JPEG.)
page 5
Place a disc with the label side facing up.
•Place an 8 cm (31/8 inches) disc in to the hollow part in the center.
| 1 Press | AUDIO. |
| • The power will be turned on and the STANDBY | |
| lamp will go off. | |
| • Press | AUDIO again to turn off the power. |
2 | Press 0OPEN/CLOSE to open the disc | |
| tray to load a disc. | |
3 | Press DVD/CD 3. | |
| The disc tray will close and playback will start. | |
•The power will be turned on when any of PLAY 3, FM, AM, AUX, or 0 on the main unit and DVD/CD 3, FM, AM, AUX, or 0OPEN/CLOSE on the remote control is pressed while the power is off.
If any button other than 0 or 0OPEN/CLOSE is pressed, the source will also be changed (if there is a disc loaded, playback will start).
NOTE
•A menu screen may be displayed on the TV after starting playback of a DVD/VCD/SVCD. In this case, select a desired item to playback by using the following buttons on the remote control.
•Select a desired item using cursor 5/3/∞/2 and press ENTER.
•Select a desired item using the number buttons.
•Depending on the disc, actual operation may be different from the description.
Screens displayed on the TV when the power is turned ON.
|
|
| The following messages appear depending on the status of the system. | |
|
|
| (When FM, AM or AUX is selected as a source, the messages do not appear.) | |
|
|
|
|
|
| NOW READING | Appears when the system is reading the disc information. Wait for a while. | ||
|
|
| ||
| REGION CODE | Appears when the Region Code of the DVD VIDEO does not match the code | ||
| ERROR! | the system supports. (page 3) | ||
|
|
| ||
| NO DISC | Appears when no disc is loaded. | ||
|
|
| ||
| OPEN | Appears when opening the disc tray. | ||
|
|
| ||
| CLOSE | Appears when closing the disc tray. | ||
|
|
| ||
| CANNOT PLAY THIS | Appears when trying to play back an unplayable disc. | ||
| DISC |
| ||
12 |
|
|
|
|
|
|
|
| |