Stamina Products 7100 owner manual Assembled

Page 9

ASSEMBLY INSTRUCTIONS

B.	A.
	(Assembled
	at the factory)

NOTE: Be careful not to damage the PULSE SENSOR WIRES(44) when attaching the HANDRAIL(8) and the SEAT FRAME(7).

STEP 5

Refer to illustration A. Attach the HANDRAIL(8) to the SEAT FRAME(7) with CARRIAGE BOLTS (M8x1.25x45mm)(62), ARC WASHERS(M8)(86), LOCK WASHERS(M8)(88), and ACORN NUTS(M8x1.25) (84).

STEP 6

Refer to illustration B. Slide the SEAT FRAME(7) onto the REAR FRAME(5) and lock in position with the ADJUSTMENT KNOB(51). Attach the STOPPERS(52) to the top end of the REAR FRAME(5) with HEX BOLT(M8x1.25x80mm)(68) and NUT(M8x1.25)(80). Also, please verify that the other STOPPERS(52) are assembled at the factory.

9

Image 9

Contents Stamina Products Owners ManualTable of Contents Safety InstructionsCall US First Magnetic Fusion 7100 Bike Before YOU BeginEquipment Warning & Notice Labels Hardware Identification Chart Step Assembly InstructionsAssembly Instructions Assembled Socket Assembly Instructions Assembly Instructions Function Inspection SET UP InstructionsLoad Adjustment Operational Instructions Seat AdjustmentComputer Instructions LCD FeaturesMain Display Panel LCD MonitorProgram Descriptions Load IndicatorHOW to Install and Replace Batteries Computer OperationOperation Descriptions Storage MaintenanceTarget Heart Rate Zone Estimated by Age Conditioning GuidelinesWARM-UP and COOL-DOWN Warranty Limited WarrantyFront Product Parts DrawingPart Name Parts ListMounting Bracket Water Bottle Parts List PART# Part Name QTYPage Stamina Products, Inc Box Springfield, MO FAX/MAIL Ordering Form