Fan (if equipped) will not turn on or will not turn off | Check data cable integrity | All wires in cable should be intact. If any are cut or |
|
| crimped, replace cable. |
|
|
|
| Check data cable connections/orientation | Insure cable is connected securely and oriented |
|
| properly. Small latch on connector should line up and |
|
| snap into place. |
|
|
|
| Reset Machine (if equipped with reset button) | Unplug unit from electrical outlet for 3 minutes. |
|
| Reconnect to outlet. After Console powers up, press |
|
| "reset". |
|
|
|
| If bike has batteries, check Battery Indicator on console | If the battery level shows low or no power, replace |
| or check batteries. | the batteries. |
|
|
|
Fan (if equipped) will not turn on, but Console operates | Check for blockage of fan | Turn power off (remove batteries or unplug power |
|
| adapter). Remove material from fan. If necessary, |
|
| detach the Console to help with removal. Replace the |
|
| Console if unable to remove blockage. |
|
|
|
Unit rocks/does not sit level | Check leveler adjustment | Leveling feet may be turned to level bike. |
|
|
|
| Check surface under unit | Adjustment may not be able to compensate for |
|
| extremely uneven surfaces. Move bike to level area. |
|
|
|
Pedals loose/unit difficult to pedal | Check pedal to crank connection | Pedal should be tightened securely to crank. Insure |
|
| connection is not |
|
|
|
| Check crank to axle connection | Crank should be tightened securely to axle. Be sure |
|
| cranks are connected at 180 degrees from each other. |
|
|
|
Seat post movement | Check locking pin | Insure adjustment pin is locked into one of the seat |
|
| post adjustment holes. |
|
|
|
| Check adjustment knob | Insure knob is securely tightened. |
|
|
|
15