Kettler 07938-180 manual English, Instr uctions for Assembly

+49 (0)2307 974-2111 +49 (0)2307 974-2295 Mail: service.sport@kettler.net

+43 662 620501 0

+43 662 620501 20 Mail: office@kettler.at

0900 785 111

english

the Sport specialized trade.

■To operate correctly, the pulse function requires a minimum voltage of 2,7 volts (only for computers working with batteries).

■The equipment is dependent of revolutions per minute.

■Please ensure that liquids or perspiration never enter the machine or the electronics.

■Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.

■Always wear suitable shoes when using.

■Nobody may be in the moving range of a training person during training.

■After your training by all means turn the turning handle for brake adjustment back to zero position in order to avoid heat influences on brake linings and disk flywheel.

■The brake linings should also be checked at regular intervals and adjusted as necessary.

Instr uctions for Assembly

!RISK! Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!

■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.

■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.

■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if pos- sible technically talented.

■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.

■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed.

■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function cor- rectly (the locking device is destroyed), and must be replaced.

■For technical reasons, we reserve the right to carry out prelim- inary assembly work (e.g. addition of tubing plugs).

List of spare par ts page 33 - 35

When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see handling).

Example order: Art.no. 07938-180 / spare-part no. 10100030 / 2 pieces / S/N ....................

Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible.

It is important to provide a detailed defect description / damage report!

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).

DHeinz KETTLER GmbH & Co. KG SERVICECENTER

Henry-Everling-Str. 2

D-59174 Kamen

www.kettler.de

AKETTLER Austria GmbH

Ginzkeyplatz 10

5020 Salzburg www.kettler.at

CH Trisport AG

Im Bösch 67

CH - 6331 Hünenberg

Servicehotline Schweiz:

www.kettler.ch

5