Life Fitness R3 owner manual Service & Product Maintenance, Troubleshooting

6SERVICE & PRODUCT MAINTENANCE

6.1TROUBLESHOOTING

Problem		Cause / Solution
	Check to see that the power cord is fully plugged into the back of the
	Lifecycle exercise bike and into the wall. Make sure the power cord is fully
	seated into the back of the Lifecycle exercise bike.
No power.	You may be in “Energy Saver Mode”. Press the “Energy Saver” button to
	see if the console turns on.
	Verify that all customer assembly connections are working properly.
	Unplug and re-plug each connection to verify. Look to see if any cables
	were pinched during assembly.
Clicking noise while pedaling.	Use the wrench that was included with the Lifecycle exercise bike to
	ensure the pedals are assembled as tight as possible.
Hear noise as speed increases.	It is normal for any mechanical device to become louder as speed
	increases.
Can’t feel a resistance change at the	The resistance curve of the Lifecycle exercise bike is designed so that
beginning levels.	you can feel a greater difference in resistance at higher levels.
	Potential reasons for the wireless heart rate not to work properly include:
	1. The wireless heart rate is turned OFF in the Settings Menu. Enter
		the Settings Menu and verify that WIRELESS HR is turned ON.
	2. There is poor contact between the telemetry heart rate strap and
Wireless heart rate is not working.		the skin.
	3.	There is electrical interference from electrical appliances with the
		telemetry heart rate strap from fluorescent lights, kitchen appliances,
		etc. Move the Lifecycle exercise bike to a different location or move
		electrical appliances away from the Lifecycle exercise bike.
	4.	The battery in the Heart Rate Telemetry Strap needs to be replaced.
		The battery is a CR2032 (3V).

19