9.For units with Engage Consoles Position the unit in its final position for use.
Remove the protective liner from one of the provided FASTENER STRIPS. Attach the fastener strip to the bottom of the POWER BLOCK (16). Interlock the remaining FASTENER STRIP to the installed FASTENER STRIP. Remove the remaining protective liner from FASTENER STRIP and secure the POWER BLOCK to the underside of the CENTER FRAME as shown.
Route the POWER CORD (17) under the FRONT STABILIZER (Q) and install the
Connect the BROADCAST SUPPLY CABLE (S) and NETWORK CABLE (T) to the MEDIA CONNECTOR BOARD.
Connect the POWER CORD to the POWER BLOCK.
MEDIA CONNECTOR BOARD RECEPTACLES:
a.12 V POWER FOR ATTACHABLE TV
b.36 V EXTERNAL POWER FOR ENGAGE CONSOLE (15” LCD)
c.BROADCAST SUPPLY INPUT (COAXIAL)
d.FITNESS NETWORK;
a | c |
b | d |
|