Assembly Instructions
Assembly of the BFSB10 takes professional installers about 1/2 hour to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially, the process will take time, but is fairly easy.
Assembly Tips | Do not fully tighten bolts until instructed to do so. |
Read all “Notes” on each page before beginning each | Note: After assembly, you should check all functions to ensure | |
step. | correct operation. If you experience problems, first recheck | |
| the assembly instructions to locate any possible errors made | |
While you may be able to assemble the BFSB10 using the | during assembly. | |
If you are unable to correct the problem, call the dealer from | ||
illustrations only, important safety notes and other tips are | ||
whom you purchased the machine or call | ||
included in the text. | for the dealer nearest you. |
Some pieces may have extra holes that you will
not use. Use only those holes indicated
in
the instructions
and il
- lustrations.
NOTE: To find out the length
of a particular bolt, measure its
shank (the long,
narrow part beneath the head). Refer to the following diagram:
5