S T E P |
|
2 | Be careful to assemble all components |
in the sequence they are presented. |
Some components may be pre-assembled.
A.Insert Seat Post (56) into the tube on Main Frame (1) with knob (33) positioned as shown in the diagram.
Hand tighten only at this time.
B.Slide Seat (60) onto Adjustible Seat Frame (59) and position the assembly onto Seat Post (56) and secure using:
One 57 (washer) One 58 (lock knob)
Use the provided Spanner Wrench (65) at this time to completely tighten the assembly.
C.Insert Handle Post (61) into Main Frame (1) as shown in the diagram. Secure assembly using Knob (33).
D.Slide Handle Bar (62) onto the top of Handle Post (61) and secure using:
One 57 (washer) One 58 (lock knob)
8