Product Information

•Physics Principle : Oxygen is generated mechanically and naturally by filtering.

•Prompt Oxygen Supply : Oxygen is generated instantly when the

machine is turned on.

•High efficiency and energy saving : Supplying oxygen at low cost.

•Time Setting : Time setting can be from 10 to 60 minutes.

•Relaxing Music : Nature sounds help with the release of tension.

•Filters : Filtration keeps out larger dust and impurities.

•Moderate Air Flow : Moderate and mild air flow avoids discomfort within the nose.

•Headset : Headset is designed for comfortable use.

•Vapor discharge : The design of water condensation tube and exhaust

blower avoids residue vapor effect and cleans filter membranes.

Safety Information

Caution : Advice on how to get the best performance from the machine.

Warning : Important safety information for hazards that might cause serious injury or machine breakdown.

Danger : Urgent safety information for hazards that will cause serious injury or death.

Caution

THIS MACHINE IS NOT FOR MEDICAL USE. It is designed for health maintenance.

Do not block the ventilation port located on the back of unit.

Do not set base on carpet or other soft surface. This could cause air flow restriction and damage to unit.

For best performance, regularly clean the Intake Filter and panel located in the back of the machine.

Do not use the machine more than 60 minutes per session. Adjust operating time if necessary.

Warning

DO NOT use the machine when there are any hazardous vapors or pesticide spray in the room.

Do not use while bathing or in other wet location to avoid the risk of serious or fatal injury from electrical shock.

Do not leave the machine near heated areas. High heat will cause the plastic case to deform.

Disconnect the power cord from the electrical outlet if not in use.

Place unit on a stable, flat surface during operation. A tilted or unstable placement will result in shifting of internal parts thereby causing larger vibration and noise.

During operation, do not press hard upon the external plastic tube as this will result in air flow restriction and damage to unit.