Burley HD 4485/86/87, HD 4435/36/37 warranty Single Passenger, Ladder Lock

Page 10

The straps and sliding buckles sewn to the backrest of the child seat are part of a self-adjusting system that keeps the shoulder straps at the correct height for children of various sizes. When you tighten the shoulder harness, the sliding buckles allow the shoulder belts to come across the top of the child’s shoulders, creating a snug fit. In addition, the sliding buckles keep the straps from falling off of the shoulders.

IMPORTANT: Always fasten and adjust the two buckles behind the child seat when using the trailer.

Single Passenger:

Ladder Lock

10

1.Remove both shoulder harnesses from the shoulder straps (see Section VI for details on removing the shoulder harness). Unclip the Y-buckle if necessary. Store one of the shoulder harnesses in a safe place. Leave outboard shoulder straps dangling. Do not unthread the straps from the ladder locks in this step.

2.Remove the two center shoulder straps by unthreading them from the ladder locks.

3.Trade the position of the shoulder straps and re-insert the straps into the ladder locks as shown in the illustration. The flat parts of the male portion of the Y-buckle should face toward the center.

4.Install one shoulder harness assembly in the center position as shown

below. See Section VI for details on installing the shoulder harness.

5.Seat the child in the center of the seat.

6.Snap in the shoulder straps at the Y-buckle. Ensure that the Y-buckle is adjusted so that it is at the child’s sternum.

7.Ensure that the shoulder straps are adjusted so that the child is comfortably kept from moving too far forward in the seat.

8.Fasten and adjust lap belt so that it is snug.

Burley Cub Owner’s Instruction and Safety Manual

Image 10
Contents Cub When Loaning or Selling Your Trailer IntroductionHardware Bag Contents and Tool List II. Attaching the WheelsIII. Installing the Tongue & Safety Flag Installing the TongueInstalling the Safety Flag IV. Unfolding & Folding Your Burley Cub Installation and Use of the CoverUnfolding your Burley Cub Parking Brake Installation and Operation Installing the CoverBrake Using the Parking Brake Using the Seat HarnessFolding Your Burley Cub Single Passenger Ladder LockTwo Passengers Ladder LockSeat Pad and Shoulder Harnesses VI. Padded Seat & Shoulder HarnessSeat Pad Shoulder Harness Pad VII. Hitching the Burley Cub to Your BicycleHitching the Trailer to Your Bicycle Hitch and Tongue Maintenance VIII. Trailer Maintenance and CareStoring Your Burley Cub Suspension Elastomer Maintenance Fabric CareLoading Your Trailer IX. Safety GuidelinesUse Well-Maintained Bicycle and Trailer Starting and StoppingFit, Alert, Adult Pilot No Headphones or Other DistractionPrevent Trailer Tip Over No Motorized VehiclesAvoid Riding in Traffic Ride on Clean, Paved SurfacesRiding When It’s Slippery Navigating Curbs, Stairs, and EscalatorsWear Helmets Always Use Your CoverCool Weather Use Proper Wheels and Tires are EssentialObserve Age and Height Restrictions Use Your FlagProtect Your Child Follow the Rules of the Road Have Fun DefensivelyMonthly Checklist Safety ChecklistsBefore Each Ride, Ensure the Following XI. Parts List and Drawing Burley Cub Owner’s Instruction and Safety Manual Burley Trailer Limited Warranty About Burley Design Cooperative