Burley HD 4485/86/87, HD 4435/36/37 warranty III. Installing the Tongue & Safety Flag

Page 4

Once the wheels are fully seated in the hollow axle, the quick-relase lever should be positioned so that it is aimed to the rear of the trailer in the “CLOSED” position (the lever is marked for OPEN or CLOSED positions). The wheel quick-release/axle assembly comes pread- justed from Burley.

NOTE: All wheels, including optional spoked alloy wheels, must be mounted with the recessed side of the hub facing out- ward.

Make sure wheels are held securely, with wheel shaft fully inserted into the hollow axle. You should not be able to rock or shift wheels. Improperly installed wheels can fall off, causing an accident or serious injury.

With wheels mounted, both reflectors must face outward. Check to see that both reflectors have been installed correctly. Incorrectly installed reflectors can reduce visibility at night and cause an accident or serious injury.

III. Installing the Tongue & Safety Flag

Installing the Tongue

The tongue attaches to the left side of the trailer. When installed, the tongue bends to the right, which places the hitch near the center line of the trailer. Slide the tongue through the two plastic tongue receptacles until the end of the

tongue is flush with the back edge of the rear tongue receptacle.

Secure the tongue as follows:

1.Slide the retaining pin

in the rearward receptacle through the hole provided in the tongue.

4

Burley Cub Owner’s Instruction and Safety Manual

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cub When Loaning or Selling Your Trailer IntroductionHardware Bag Contents and Tool List II. Attaching the WheelsIII. Installing the Tongue & Safety Flag Installing the TongueInstalling the Safety Flag IV. Unfolding & Folding Your Burley Cub Installation and Use of the CoverUnfolding your Burley Cub Parking Brake Installation and Operation Installing the CoverBrake Using the Parking Brake Using the Seat HarnessFolding Your Burley Cub Single Passenger Ladder LockTwo Passengers Ladder LockSeat Pad and Shoulder Harnesses VI. Padded Seat & Shoulder HarnessSeat Pad Shoulder Harness Pad VII. Hitching the Burley Cub to Your BicycleHitching the Trailer to Your Bicycle Hitch and Tongue Maintenance VIII. Trailer Maintenance and CareStoring Your Burley Cub Suspension Elastomer Maintenance Fabric CareIX. Safety Guidelines Use Well-Maintained Bicycle and TrailerLoading Your Trailer Starting and StoppingNo Headphones or Other Distraction Prevent Trailer Tip OverFit, Alert, Adult Pilot No Motorized VehiclesRide on Clean, Paved Surfaces Riding When It’s SlipperyAvoid Riding in Traffic Navigating Curbs, Stairs, and EscalatorsAlways Use Your Cover Cool Weather UseWear Helmets Proper Wheels and Tires are EssentialUse Your Flag Protect Your ChildObserve Age and Height Restrictions Follow the Rules of the Road Have Fun DefensivelyMonthly Checklist Safety ChecklistsBefore Each Ride, Ensure the Following XI. Parts List and Drawing Burley Cub Owner’s Instruction and Safety Manual Burley Trailer Limited Warranty About Burley Design Cooperative
Top Page Image Contents