Installation of Accessories, Hole | Browning Hunting Equipment

Compound Bow

U S E R’ S G U I D E

INSTALLATION OF ACCESSORIES

Shelf

Hole

Arrowrest/Overdraw: The arrowrest or overdraw should be installed according to the instructions received with the product. It is usually mounted to the riser in the threaded hole on the side opposite the shelf (hole "A") using the hardware provided with the arrowrest or overdraw.

Sight: The sight should be installed according to the instructions received with the product. It is usually mounted to the riser in the threaded holes (holes "B") on the side opposite the shelf using the hardware provided with the sight.

Stabilizer: Likewise, the stabilizer should be mounted according to the manufacturer's recommendation. It is usually mounted in the threaded hole on the front of the riser (hole "C").

Bow Sling: The bow sling attaches to the riser of the bow generally with the stabilizer. If a stabilizer is not used, attach the sling to the riser with the correct sized bolt using the hole provided for the stabilizer (hole "C").

OTHER ADJUSTMENTS

Draw Weight: Your bow is factory-set to the peak weight indicated on the D label on the lower limb of the bow. Slight changes in draw weight can be obtained by turning the limb bolt in or out. Before making any changes in weight, turn the limb bolt clockwise until it no longer moves. This adjusts the limb to its maximum weight setting. Never use extreme torque when turning the bolt or damage to the limb may occur. The limb bolt then may be turned counterclockwise to obtain the desired weight, but NEVER more than 4 turns or revolutions out from the bottomed position. Adjust each limb exactly the same. If the bow has a limb bolt lock, you will need to loosen the lock screw before making any adjustments.

Limb

Bolt

Lock

Wheels/Cams: All Browning Archery wheels and cams have adjustable features. Each one comes from the factory set-up and ready to use, but there may be occasions where you need to adjust the draw-length setting of your bow. If you are not sure of the adjustment you are making, stop and see your Browning Archery dealer for assistance.

Your authorized Browning Archery dealer is supplied with technical information on Browning Archery bows and cams. Please see your dealer for assistance when making these adjustments.