Browning Hunting Equipment manual String Recoil Suppressor SRS System, CAM Adjustments, Position

Cam Adjustments:

Compound Bow

U S E R’ S G U I D E

STRING RECOIL SUPPRESSOR (SRS) SYSTEM

•Rotate the rubber stop approximately 60 degrees every 500 shots

• Replace rubber stops when the string and cables are replaced
•	Do NOT adjust the SRS bracket. It is factory set in the correct	60º
	position.
•	See your Browning Archery Dealer for replacements and
	installation

SRS System Patent Pending

CAM ADJUSTMENTS

All Browning Archery cams use the patented Inner

Cam System. This system allows draw length adjustments over a prescribed range without putting the bow in a bowpress. In all cases, the "A" setting is the longest draw length for that bow and draw lengths get shorter as you progress up the alphabet (A to B, B to C, etc.). When adjusting the inner cam on a two-cam bow or hybrid cam bow, both cams must be set in the same letter position.

WARNING:

Tighten all cam screws before shooting your bow!

Lock

Screw

Inner

Cam

Screw

BROWNING ARCHERY DISCOVERY™ CAMS

The Discovery™ cam design ramps up to the bow’s peak draw weight and then holds a constant draw weight up to 30 inches.

7