Bushnell 98-2293/05-12 manual Fast Focus Eyepiece, Power Change Ring, Side Focus

Page 4

Fast Focus Eyepiece

The fast-focus eyepiece dial is found on the ocular end of the Bushnell Elite Tactical Riflescope. Use this adjustment to obtain a reticle image that appears sharp to your eyes. If adjustment is needed, look at a distant object for several seconds without using your scope. Then, shift your vision quickly, looking through the scope at a plain background. Turn the fast-focus eyepiece dial clockwise or counterclockwise until the reticle pattern is sharp and clear. The eyepiece has a large adjustment range and should be used in conjunction with the side focus (parallax) adjustment to obtain maximum resolution when viewing targets at long ranges.

Power Change Ring

Changing the magnification of the Bushnell Elite Tactical Riflescope can be accomplished by grasping the knurled knob marked with the scope’s magnification range (located on the far end of the ocular bell end). Turn the power change ring clockwise for higher magnifications, counterclockwise for lower magnifications. The magnification setting can be identified by noting the number that is in front of the stationary dot on the scope tube.

Side Focus

The Side Focus adjustment corrects Parallax error. Parallax error is experienced when the intended target and the reticle are not on the same focal plane. The side focus adjustment relocates an optical element within the scope, manipulating the incoming image to appear on the same focal plane as the reticle within the riflescope, thus eliminating parallax error. Parallax error results in inconsistencies regarding point of impact. This can be best experienced by looking at a 100 yard target with the side focus set to 500 yards. While slightly moving your head left and right, or up and down, you will notice movement at the location where the crosshairs intersect. However, if you change your side focus adjustment to 100 yards while looking at the 100 yard target, the intersection of the crosshairs will not move. Please note the distance markings on the dial are intended as reference points only. Exact side focus adjustments may needed after making adjustments to the eyepiece in order to achieve a high resolution, parallax free image.

4

Image 4
Contents Proud USA Company Elevation Turret Elevation and Windage Turrets StepFast Focus Eyepiece Power Change RingSide Focus First Focal Plane Reticle Bore Sighting and Zeroing the Scope Bushnell Mil Dot Reticle Mils at Yards Using the Mil Dot Reticle for Ranging EquationsConverting Trajectory Data to Mil Holdovers Federal .308 168-gr Bthp Holdovers for a Mil-Dot Reticle Distance Trajectory Mil Size Actual HoldoverUsing the Mil Dot Reticle for Holdover Yards Mil valueBushnell G2DMR Reticle Horizontal Crosshair Mil consisting Ten .1 mil marks VerticAL Crosshair Horus Vision H59 Reticle Calculating Holds for ElevationCalculating Holds for Moving Targets Horus Vision TRMR2 Reticle Page Calculating for Movers 3mphReticle from 10TH MIL to 38TH MIL Down on Vertical Stadia Horizontal StadiaMaintenance StorageWarranty / Repair Elite Lifetime Limited Warranty U.S.A. Send To Canada Send To Page