The Horizontal Crosshair
On the horizontal crosshair, numerically designated Mil markings extend from the center of the crosshairs outward to the right in 2 Mil increments. To keep the reticle plane clean, the numbers were removed on the left side of the reticle but the reference points coincide with the markings from the right side of the crosshair. Moving from the center point to the right in the picture below measurements are as follows: .5 Mil, 1 Mil, 1.5 Mil, 2 Mil…etc.
1 Mil from center
1 Mil from center
.5 Mil from center |
|
|
.5 Mil from center | ||
14