Panasonic EYFEA1N VII. Maintenance, VIII. Accessories, IX. Appendix, Specifications

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

VII. MAINTENANCE

Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.

In the event that the inside of the tool or battery pack is exposed to water, drain and allow to dry as soon as possible.

Carefully remove any dust or iron filings that collect inside the tool. If you experience any problems operating the tool, please contact your nearest authorised service center.

VIII. ACCESSORIES

Use only bits suitable for size of drill's chuck.

IX. APPENDIX

MAXIMUM RECOMMENDED CAPACITIES

Model		EYFEA1N
Screw	Machine screw	Low : M5
driving		High : M4

X. SPECIFICATIONS

MAIN UNIT

Model			EYFEA1N
Motor voltage			7.2 V DC
No load	Low	0 - 300 min-1(rpm)
speed	High	0 - 900 min-1(rpm)
Maximum	Low	6.0 N·m	(61 kgf-cm, 53.24 in-lbs)
torque	High	2.0 N·m	(20 kgf-cm, 17.75 in-lbs)
Clutch torque		Approx. 0.3	N·m (3 kgf-cm, 2.6 in-lbs) –
		4.0 N·m (41 kgf-cm, 35.6 in-lbs)
Overall length		145 mm (5-7/10")
Weight (with battery pack)		0.63 kg (1.39 lbs)

- 14 -