V. ASSEMBLY
Attaching or Removing Bit
NOTE:
When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock).
1.Attachment
1 While pulling the bit holder
2 Insert the bit
3 Release the bit holder
①
② 
2.Removal
1 While pulling the bit holder
2 Remove the bit
①
②
9.5mm (3/8") - 13 mm (33/64") 6.35 mm (1/4")
Attaching or Removing Bat- tery Pack
1. To connect the battery pack:
Insert the battery pack firmly into the main body.
2.To remove the battery pack:
Push on the button from the side to release the battery pack.
Button
VI. OPERATION
[Main Body]
Switch Operation
1.The speed increases with the amount of depression of the trigger. When beginning work, depress the trigger slightly to start the rotation slowly.
2.A feedback electronic controller is used to give a strong torque even in low speed.
3.The brake operates when the trigger is released and the motor stops immediately.
NOTE:
When the brake operates, a braking sound may be heard. This is normal.
- 8 -
