Bushnell 119636C instruction manual PIR Sensor LED Flashes/Doesn’t Flash, LCD Screen Issues

Page 30

4.Try to avoid setting the camera up on small trees that are prone to being moved by strong winds.

5.Remove any limbs which are right in front of the camera lens.

PIR Sensor LED Flashes/Doesn’t Flash

1.When the camera is in the “Setup” mode, a special LED on the front of the camera will flash when it senses motion. This is for setup purposes only and will help the user aim the camera.

2.During use, the LED will not flash when the camera takes an image. This is to help keep the camera hidden from game.

LCD Screen Issues

1.LCD screen powers on but no text is present.

a.After moving the switch from “Off” to “Setup” or “On”, make sure that the switch is correctly in position to ensure the proper mode (avoid positions “between” two modes).

b.Do not move the switch directly from “On” to “Setup”-always move the switch all the way down to “Off” first, then back up to “Setup”.

2.LCD screen shows a faint black line after turning from “Setup” to “On”.

a.The LCD will turn off when you slide the switch to the “On” position. In some cases, this black line will appear and then

fade in about 1 second. This is normal and the camera will function properly.

3.Screen comes on but then powers off

a.Make sure that you have installed the SD card correctly.

Camera won’t retain settings

Make sure that you have been saving the changes to any parameter settings that you made while in Setup mode, by pressing “OK” after changing the setting. If you don’t save your new setting after changing it, the camera will continue to use the original default setting for that parameter.

30

Image 30

Contents S T R U C T I O N M a N U a L Important Note Introductionenglish About the Trophy CamApplications Parts and Controls Back ViewFront View Installing the Batteries and SD Card Using an External Power Source optional, user providedLoading Batteries Inserting the SD Card OFF Mode Using the Trophy CAMOFF, ON, and Setup Modes On ModeSetup Mode Setup Mode Shortcut Keys/FunctionsSetup Information Screen Camera Still Photo Mode Using the Setup Menu to Change Settings Changing Parameter Settings in Setup ModePress OK to confirm and execute the new setting Parameter DisplayEXAMPLES-Changing the Settings of Some Common Parameters Field Scan 2x with Live Trigger Feature Page Select Field Scan a press OKStart times Select Field Set Field Setup Menu Parameters and Settings Description Bold=defaultParameter Settings Description IntervalTime Stamp Field Scan Mounting and Positioning the Trophy CAM MountingSwitching on the Camera Sensing Angle and Distance TestPlaying BACK/DELETING the PHOTOS/ Videos Reviewing Images Directly From the SD CardReviewing Images on an External Video Monitor Reviewing Images by Connecting the Camera to a Computer Deleting Photos or Videos Downloading the PHOTOS/VIDEOS Camera takes continuous images of no subject Troubleshooting / FAQ Battery life is shorter than expected Camera stops taking images or won’t take imagesCamera won’t power up Still Photo and/or Video Quality ProblemsNight photos or videos appear too dark Date/Time Stamp not appearing on images Photos Do Not Capture Subject of InterestLCD screen powers on but no text is present LCD Screen IssuesCamera won’t retain settings Screen comes on but then powers offMoisture or Ants Inside Camera Field Scan Time Lapse not working properlyTechnical Specifications ONE Year Limited Warranty FCC Compliance Statement Page Bushnell Outdoor Products