NordicTrack NTEL7706.1 manual Maintenance and Troubleshooting, Battery Replacement

Page 18

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately.

To clean the elliptical exerciser, use a damp cloth and a small amount of mild soap. Important: To avoid damage to the console, keep liquids away from the consote and keep the console out of direct sunlight.

BATTERY REPLACEMENT

If the console display become dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 11 on page 9 for replacement instructions.

HOW TO LEVEL THE ELLIPTICAL EXERCISER OR ELIMINATE FLEXING iN THE FRAME

If the elliptical exerciser rocks on your floor during use, turn one or both of the Leveling Feet (98) until the rocking motion is eliminated.

88

14,1

97

98

If the elliptical exerciser flexes in the center during use, turn the Center Foot (95) until the flexing is elimi- nated.

HOW TO EMMINATE RUBBING OF THE DISCS

See the drawing above. If the Discs (12) rub against the Side Shields (14, 15) during use, make sure that the Center Foot (95) is installed in the Folding Frame

(2). If the Center Foot is installed, loosen the two indi- cated Bolt Sets (88) and the two M4 x 16mm Screws (97) in each side of the elliptical exerciser.

Adjust the position of the Side Shields (14, 15) until the Discs (12) no longer rub against them, and then tighten the Bolt Sets (88) and the M4 x 16mm Screws (97).

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgdp pulse sensor does not function proper- ly, see step 5 on page 14.

HOW TO ADJUST THE BELT

If the

pedals

slip

 

while you

are

 

 

pedaling,

even

 

while

the

resis-

 

tance

is adjusted

 

to the highest

 

 

setting, the belt

 

may need to be

 

adjusted. To

 

13

adjust

the

belt,

12

first carefully

pry

 

off the left

Disc

 

Cover (13) using a flat screwdriver. Next, remove the four Screws (not shown) from the center of the left Disc (12). Gently rotate the Disc Cover and the Disc away from the elliptical exerciser.

Loosen, but do not remove, the three 1/4" x 19mm Button Screws (114). Insert the shaft of

a screwdriver

downward\- 48 between the

Idler (47) and the Idler Pulley (48). Pull the top of the screwdriver

toward the rear of the elliptical exerciser until the Belt (96) is tight, and then tighten the three Button Screws.

Reattach the left disc with the four screws and then reattach the left disc cover.

18

Image 18
Contents QUESTIONS? Call TOLL-FREEOn the WEB Contents 800MMPORTANT Precautions Before YOU Begin RearFront Washer Page Page Page Attach the Left Link Arm 30 to the Left Pedal HOW to USE the Elliptical Exerciser HOW to Exercise on the Elliptical Exerciser Features of the Console ConsoleOw TOUSET,EMAUALMODE Page HOW 30 USE a Preset Program SpeedHowToUSEAHEARrRATEPROGRAM HOW to USE AN Ifit Program HOW to USE the Stereo Sound SystemRtr,osstL,,.2X2t..,II /7 HOW to Emminate Rubbing of the Discs Maintenance and TroubleshootingBattery Replacement Handgrip Pulse Sensor TroubleshootingWorkout Guidemnes CONDiTiONiNG GUiDELiNESAvcarning Exercise FrequencyPart LIST--ModelNo. NTEL7706.1 Ro4o7A Qty Exploded Drawing AModel No. NTEL7706,1 Ro4o7A Exploded Drawing BModel No. NTEL7706.1 Ro4o7A HOW to Order Replacement Parts Limited Warranty
Related manuals
Manual 24 pages 4.45 Kb

NTEL7706.1 specifications

The NordicTrack NTEL7706.1 is a state-of-the-art treadmill designed to enhance your home fitness experience through cutting-edge technology and user-friendly features. This model stands out with its emphasis on interactive training, bringing gym-quality workouts right to your living room.

One of the key features of the NTEL7706.1 is its impressive 10-inch touchscreen display. This feature transforms the traditional treadmill experience by offering a vibrant interface where users can select from a variety of workouts and track their progress in real time. The included iFit technology elevates the training experience, providing access to countless on-demand workouts guided by professional trainers. With iFit, users can even enjoy virtual running trails from around the world, making every session feel unique and motivational.

The NTEL7706.1 is equipped with a powerful 3.0 CHP motor, designed to deliver consistent performance, even during intense workout sessions. The treadmill boasts a maximum speed of 12 mph, allowing users to push their limits as they work on speed and endurance. Its incline capabilities, reaching up to 15%, further mimic outdoor running conditions, providing an effective way to add intensity to your workouts.

In addition to these functionalities, the treadmill features a spacious 20" x 60" running surface, offering ample room for comfortable strides. The FlexSelect cushioning system provides the option to customize the deck’s firmness, allowing users to choose between a softer surface that reduces impact on joints or a firmer feel that closely resembles running outdoors.

Moreover, the NTEL7706.1 integrates Bluetooth technology, enabling users to easily connect their devices for music streaming. This feature enhances the workout experience, as users can enjoy their favorite tunes or podcasts while exercising. The built-in speakers amplify sound quality, creating an engaging environment.

Durability and stability are critical aspects of the NTEL7706.1, featuring a robust frame designed to withstand the rigors of intense workouts. Its foldable design allows for easy storage, making it a practical choice for home gym setups of any size.

In summary, the NordicTrack NTEL7706.1 combines advanced technology with user-centric design, making it an excellent choice for anyone looking to enhance their fitness journey. With its interactive features, powerful motor, and customizable settings, this treadmill caters to a wide range of fitness levels and goals.