OPERATIONAL INSTRUCTIONS
USING THE ELECTRONIC METER
POWER ON: Pedal movement or press the button.
POWER OFF: Automatic shut off after four minutes of inactivity.
FUNCTION BUTTON:
MODE/RESET : Press and release to select functions.
Press and hold for three seconds to reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change every four seconds. Press and release the button until "SCAN" appears on the display.
TIME: Displays the time from one second up to 99:59 minutes.
SPEED: Displays the current speed from zero to 999.9 Miles per hour.
DISTANCE: Displays the distance from zero to 999.9 miles.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will be kept. Push the button and hold it down for three seconds to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERY:
1.Open the Battery Door on the back of the meter.
2.The meter operates with an AAA battery, included. Refer to the illustration to install or replace the battery.
NOTE:
1. Rechargeable battery is not recommended.
AAA Battery
11