Stamina Products 55-1615 owner manual Assembly Instructions, Step

Page 6

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520or e-mail us at:

parts@staminaproducts.com

STEP 1

Attach the FRONT STABILIZER(2) onto the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x60mm) (50), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(66), and ACORN NUTS(M8x1.25)(64).

STEP 2

Attach the REAR STABILIZER(3) onto the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x60mm) (50), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(66), and ACORN NUTS(M8x1.25)(64).

NOTE: You can adjust the LEVELING CAPS(44) on the REAR STABILIZER(3) to keep the INSTRIDE ELLIPTICAL stable.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents This Product is Produced Exclusively by Table of Contents Safety InstructionsCall US First Before YOU Begin Instride EllipticalHardware Identification Chart Assembly Instructions StepARM5 Metal Fitting Cable End Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Using the Electronic Meter Function ButtonOperational Instructions Load Adjustment Exercise WorkoutMaintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Product Parts Drawing DIAGRAM# Part Name QTYDIAGRAM# Part Name Warranty Page Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO
Top Page Image Contents