Stamina Products 1300 owner manual Storage, Maintenance

Page 14

STORAGE

1.To store the Magnetic Upright 1300 Bike, simply keep it in a clean dry place.

2.The Magnetic Upright 1300 Bike is approximately 38 1/2 inches long x 22 inches wide x 52 inches tall. These dimensions may vary. Please measure your Magnetic Upright 1300 Bike if exact dimensions are needed.

3.Lift the Magnetic Upright 1300 Bike from the HANDLEBAR(5) and REAR STABILIZER(3) to move.

4.To avoid damage to the electronics, remove the batteries before storing the Magnetic Upright 1300 Bike for one year or more.

MAINTENANCE

The safety and integrity designed into the Magnetic Upright 1300 Bike can only be maintained when the Magnetic Upright 1300 Bike is regularly examined for damage and wear. Special attention should be given to the following:

1.Adjust the TENSION KNOB(23) and verify that the Magnetic System provides tension. The Magnetic System should provide many years of use.

2.Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise.

3.Verify that the WARNING LABEL(59) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement WARNING LABEL(59) if it is missing or damaged.

4.Do not step on any portion of the plastic cover when getting on or off the Bike. This can cause the plastic cover to crack.

5.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

6.Worn or damaged components shall be replaced immediately or the Magnetic Upright 1300 Bike removed from service until repair is made.

7.Only Stamina Products supplied components shall be used to maintain/repair the Magnetic Upright 1300 Bike.

8.Keep your Magnetic Upright 1300 Bike clean by wiping with an absorbent cloth after use.

14

Image 14
Contents Owners Manual Stamina ProductsTable of Contents Safety InstructionsCall US First Before YOU Begin Magnetic Upright 1300 BikeEquipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions StepMain FRAME1 Metal Fitting SCREWSM6x1x8mm49 SET UP Instructions Function InspectionOperational Instructions Seat Height Adjustment Load AdjustmentHOW to Install and Replace Batteries Operational Instructions Using the MeterMODE/RESET Button FunctionsMaintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Limited Warranty WarrantyProduct Parts Drawing FrontParts List Part NameParts List Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO