S T E P 2 | BLUE BAG |
• Place a wavy washer (M20) on the axle located under the foot plate of the right lower link arm.
• Slide the axle of the lower link arm into the bracket located on the top of the right pedal arm. Secure the lower link arm to the pedal arm by attaching the pedal support bracket and screw (M8x20L) to the end of the axle. Secure the outside holes in the bracket to the footplate with two sockethead capscrews (M8x10L). Tighten screws with the 5mm
• Repeat the same steps on the left side.
S T E P 2
Pedal Arm
Lower Link Arm
6