Vision Fitness X6600HRT manual E P 1 Orange BAG, Bracket Console Mast Boot

Page 5

S T E P 1 ORANGE BAG

Console Mast

S T E P 1

Bracket

Console Mast

Boot

•Place the console mast boot on the end of the console mast.

•Connect the wire tie that exits the bottom of the console mast to the wire harness that sits in the bracket at the top of the frame. Pull the wire tie and wire harness up through the console mast while at the same time inserting the console mast into the frame bracket.

•Secure the console mast to the frame with two capscrews (M10 x 70L). Tighten with the 8mm L-shaped wrench.

•Stabilize the console mast by inserting the socket head screw (M8x80L) to the front of the bracket. Tighten with the 10mm L-shaped wrench.

•Slide the console mast boot down the console mast and snap it in place so it integrates with the side covers.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents S e m b l y G u i d e S e m b l y I d e Parts BOX Pink BAG Orange BAGBlue BAG Console Mast Bracket Console Mast BootE P 1 Orange BAG Pedal Arm Lower Link Arm Blue BAGDual Action End Cap T a t i o n U s i n g Link Arm Cover Fig . aC e s s o r y Tr a y N s o l e
Top Page Image Contents