Assembly Instructions ( FE46 )
UNPACKING THE UNIT
1.Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift box over the unit and unpack.
2.Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately.
3.Locate the hardware package. The hardware is separated into steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.
FE46 ASSEMBLY PACK CHECK LIST
Step 1
#94. 3/8"x 19 x1.5T |
| #114. 3/8"x 23 x2T | #120. 3/8" x2T Split | |||||
Flat Washer (2pcs) |
| Curved Washer (1pc) | Washer (3pcs) | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#78. M5 x 10m/m | #119. 3/8" x |
Phillips Head Screw (4pcs) | Hex Head Bolt (3pcs) |
5 | FE46 Elliptical |
|